Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER Connecting the Evolution Two to Your System

Page 30

SECTION FIVE

Connecting the Evolution Two to Your System

This section describes Evolution Two Monaural Preamplifier connections and intro- duces the CAN Link remote control option.

Input and Output Connections

Krell recommends using its proprietary Krell CAST system for unparalleled sonic performance for connections between the Evolution Two preamplifier and other CAST-equipped components. Krell CAST uses flexible interconnecting cables that can be drawn through tight spaces and concealed.

The Evolution Two also offers balanced operation. The circuitry and connections associated with balanced operation not only can minimize sonic loss but also are immune to induced noise, especially for installations using long cables.

XLR Pin Configuration

Pin 1

Ground

Pin 2

Non-inverting (0O)

Pin 3

Inverting (180O)

Inputs and outputs are located on the Evolution Two back panels. Maintain the correct left/right orientation, when hooking up your system.

Left/Right Channel Orientation

Evolution Two preamplifiers are assembled as left or right channels. Preamplifier RCA connectors (31, 36, 38, 40) are color coded. Left preamplifier channels are assembled with white RCA connectors, and right preamplifier channels are assembled with red RCA connectors.

Connection Steps

Position each power supply and preamplifier chassis where you intend to use the connected channels. Do do not move the connected chassis after they are assembled.

26

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Evolution Page Contents List of Illustrations Letter from Dan D’Agostino Letter from Dan D’Agostino About Krell Krell LegacyRevolutionary Krell Cast Technology Voltage Signal Transmission Traditional Audio SystemHow Cast and Krell Current Mode Interact Cast BasicsCast Cable Construction Evolution CastBest Musical Performance Zero Feedback Balanced Current Mode Design Ensuring Maximum PerformanceCore Technologies Fully Balanced Discrete Volume Control Separate Power SupplyAdvanced Microprocessor Control Custom Software Configurations Definition of TermsInputs and Outputs Operation Krell Current ModePreamplifier TechnologyLeft/Right Channel Orientation Unpacking and PlacementOpening the Evolution Two Shipping Carton To Remove the Preamplifier Channel from the Shipping CartonPlacement AC Power GuidelinesRepeat Steps 1-5 for the remaining preamplifier channels Connecting the Evolution Two to Your System Quick StartOperating the Evolution Two Linked Mode Anatomy of an Evolution Two 11 12 13Evolution Two Remote Control Chassis PowerFront Panel Description Remote Functions on the Front PanelPreamplifier Functions DisplayMenu Button or Key Level ControlNavigate/Customize Enter Button or KeyRemote Control Description Battery Installation and RemovalCompact Disc Functions Amplifier FunctionsIEC Power Cord Receptacle Outputs Back Panel DescriptionInputs 35, 36 Main Bus Outputs42 RC-5 Remote Connections on the Back Panel37, 38 Record Bus Outputs 43 RS-232Phono Stage Connector Link ControlInput and Output Connections Connecting the Evolution Two to Your SystemXLR Pin Configuration Connection StepsNever connect two power supplies together Connections Using can Link To Connect Multiple Evolution Two Preamplifiers via can LinkOn/Off and Stand-by Operation Linked Mode Evolution Two OperationPlay and Record To Turn Off Your SystemOperation Using can Link Customizing the Evolution Two Navigation ConventionsBacklight Menu FunctionsAC Mains Enter the menu, thenBalance Channel AssignUse to make a left channel respond as a right channel Clone Use to make a right channel respond as a left channelDisplay Info Front panel display is always onFront panel display times out after 5 seconds Input Level Trim Input NameTo select input names for other inputs, repeat Steps 3 Phase of the selected input is inverted 180 degrees Input PhasePhase of the selected input is unaffected Input TriggerEvolution Two responds to 12 V input trigger commands IR Out ControlLink Control can Link Mute Output TriggerOutput of the Evolution Two is completely silenced RC-5 Control Recalls the factory settings RecallRS-232 Control Save Software CloneTape Input Begins the software clone processInitiates the software clone Theater Mode Volume Display +12 dB. The options are Enter the menu, thenQuestions and Answers Troubleshooting System Noise Appendix can Link and Multiple Evolution Two Preamplifiers Connection of multiple preamplifier channelsAppendix can Link and Multiple Evolution Two Preamplifiers Warranty Warranty Service@krellonline.com Return Authorization ProcedureTo contact the Krell Service Department AM to 500 PM ESTSpecifications Control outputs

EVOLUTION TWO MONAURAL PREAMPLIFIER specifications

Krell Industries has long been a name synonymous with high-fidelity audio equipment, and their EVOLUTION TWO MONAURAL PREAMPLIFIER is a testament to this legacy. This premium preamp is designed to cater to audiophiles, delivering unparalleled sound quality and meticulous attention to detail.

At the heart of the EVOLUTION TWO lies Krell's commitment to superior audio performance. The preamplifier employs a fully balanced, differential signal path that minimizes noise and distortion, ensuring that the audio output is pure and true to the source. This architecture not only enhances sound quality but also integrates seamlessly with other high-end audio components in any setup.

One of the standout features of the EVOLUTION TWO is its advanced power supply design. Krell employs a toroidal transformer coupled with high-energy storage capacitors to provide stable, clean power. This allows for improved dynamics and transient response, helping to reproduce the complex nuances of music in a way that engages the listener. The preamplifier's power supply is designed to operate with extreme efficiency, ensuring consistent performance even during the most demanding listening sessions.

Additionally, the EVOLUTION TWO comes equipped with Krell's proprietary CAST (Current Audio Signal Transmission) technology. This innovative feature allows for a direct, impedance-matched connection between components, significantly reducing signal degradation over long cable runs. Audiophiles will appreciate the clarity and fidelity produced by CAST, revealing subtle textures and details in their favorite recordings.

The preamplifier also includes a range of inputs and outputs, catering to various audio sources and systems. Users can connect multiple devices, including digital sources, with ease, thanks to the EVOLUTION TWO's advanced input switching capabilities. The unit supports balanced XLR connections as well as unbalanced RCA outputs, providing flexibility for users with different equipment configurations.

Moreover, the EVOLUTION TWO MONAURAL PREAMPLIFIER boasts a stunning aesthetic, showcasing Krell's hallmark design philosophy. With its sleek chassis and elegant finish, the preamp not only sounds good but looks great in any audio setup.

In summary, the Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER is a high-performance audio component that encapsulates cutting-edge technology and exceptional craftsmanship. With its balanced signal path, innovative power supply design, CAST technology, and versatile connectivity options, it is a remarkable addition to any serious audiophile's system, promising a listening experience that truly transcends the ordinary.
Top Page Image Contents