8.Use the level control knob or up and down keys to scroll to: BACK.
9.Press the enter button or key to return to: TRIGGER 1.
10.Use the level control knob or the up and down keys to scroll to: TRIGGER 2.
11.Repeat Steps
ON
The 12 Volt trigger output is enabled at power on for the selected trigger (Trigger 1 or 2).
OFF
The 12 Volt trigger output is disabled at power on for the selected trigger (Trigger 1 or 2).
DELAY
The 12 volt trigger output is enabled at power on for the selected trigger (Trigger 1 or 2), and the delayed for a period of time
RC-5 Control
This function enables you to change the link transmit status of the Evolution Two. The options are:
Enter the menu, then:
1.Use the level control knob on the preamplifier chassis front panel or up and down keys (16) on the remote control to select:
2.Press the enter button on the preamplifier chassis front panel or the enter key (18) on the remote control. The front panel display (15) shows the default
mode: LINK TRANSMIT.
3.Use the level control knob or the up and down keys to select the desired
option: LINK TRANSMIT or LINK RECEIVE.
4.Press the enter button or key to confirm the selection. The front panel display
reads:
The
43
continued