(SECTION SEVEN: Customizing the Evolution Two continued)
(Input Trigger continued)
OFF
The Evolution Two does not respond to 12 V input trigger commands.
NORMAL
The Evolution Two responds to 12 V input trigger commands.
THEATER
The Evolution Two responds to 12 V input trigger commands, and the theater mode enabled input is selected automatically. See Theater Mode, on page 47.
IR Out Control
17 Menu Button or Key Enter or exit the menu.
16 Volume Knob or Level Keys
Navigate the menu hierarchy, review functions and configu- ration options.
18 Enter Button or Key Select a configuration option or confirm a selection.
BACK
Scroll up the menu hierarchy, or exit a menu option without confirming it.
This function enables you to access Evolution Two IR commands and program a learning remote control.
Enter the menu, then:
1.Use the level control knob on the preamplifier chassis front panel or up and down keys (16) on the remote control to select: IR OUT.
2.Press the enter button on the preamplifier chassis front panel or the enter key (18) on the remote control. The front panel display (15) shows the default
mode:
3.Use the level control knob or the up and down keys to select the desired IR command from the list.
4.Press the enter button or key to send the command out via the preamplifier front panel IR transmitter (7). The
5.Repeat Steps
6.Press the enter button or key to confirm the selection. The front panel display reads: IR OUT.
For a listing of IR codes, see the Evolution Two developer’s reference entitled
preamplifier is the link transmitter of IR data. For more information on linked pre-
amplifier channels, see Appendix: CAN Link and Multiple Evolution Two
Preamplifiers, on page 51.
40