Billy Goat Official Brush Cutter Manual for Owners

Page 15

BC2403 Series Brush Cutter Owner’s Manual

12. Tighten four screws (103) to secure belt guides (149, 150).

Make sure belt is correctly routed. (See Figure below).

13.Adjust blade drive belt tension by reaching in through top of engine base with pry bar or long screwdriver and pushing idler pulley against belt to increase tension (see below).

Adjusting Blade Drive Belt Tension

14.While holding belt under tension tighten two nuts (116) securing idler plate.

15.Check belt tension by applying force on side of belt opposite idler pulley. Belt should deflect 3/16”-1/4” (4.8-6.4 mm) with force applied perpendicular to belt.

16.Replace engine base door (7) and secure with screws (103) and washers (141).

17. Reconnect spark plug wire.

FRONT

 

Blade Drive Belt (with

Transaxle Belt not Shown)

Belt Routing Diagram

(Top View of Machine)

Figure 2

LOOKING THROUGH TOP

Blade Drive Belt

(Between Transaxle Drive

Belt and Deck)

Transaxle Drive Belt

Part No 500402

15

F020513A

Image 15
Contents Billy Goat BC2403 Series Brush Cutter Contents BC 2403 Series Specifications Sound DataVibration Data Instruction Labels F020513A Disconnect spark plug wire before assembling unit Assembly InstructionsThrottle Pull choke out Honda engine only Choke StartingGear Shift Lever CuttingClearing a Clogged Cutting Deck Shut DownCleaning MaintenancePeriodic Maintenance Common Replacement PartsBlade Removal and Sharpening Blade Drive Belt Tension Adjustment Blade Clutch Adjustment Blade Drive Belt Removal and Replacement Blade Drive Belt Between Transaxle Drive Belt and Deck Blade Drive Belt with Transaxle Belt not ShownDecrease Increase Transaxle Drive Clutch AdjustmentTransaxle Drive Belt Removal and Replacement ON/OFF Switch Circuit Schematic Diagram Wiring DiagramsStarter Switch Wiring Starter Circuit Schematic DiagramProblem Possible Cause Corrective Action TroubleshootingBattery Care For Electric-Starting Models Engine and Engine Base Assembly Illustrated Parts ListDescription BC2403HEB Handlebar Assembly QTY Transaxle and Blade Deck Assembly Description BC2403HEB Page Description BC2403HEB
Related manuals
Manual 36 pages 26.6 Kb

BC2403 specifications

The Billy Goat BC2403 is a powerful and efficient debris loader designed specifically for professional landscapers, municipalities, and grounds maintenance crews. Known for its robust performance and innovative features, the BC2403 excels in tackling a wide array of tasks such as leaf collection, brush cleanup, and general debris removal.

At the heart of the BC2403 is its powerful engine. Fitted with a reliable 305cc Honda engine, it delivers impressive power to ensure that even the heaviest debris can be handled with ease. The engine is designed to offer consistent performance while minimizing fuel consumption, making the BC2403 an economical choice for operators. Furthermore, it features a high-capacity air filter that prolongs engine life by preventing dirt and debris from entering, ensuring durability in tough working conditions.

One of the standout features of the BC2403 is its large-capacity debris bag. With a capacity of 34 bushels, it allows for extended run times before needing to be emptied. This is complemented by a high-flow, large diameter suction hose that reduces clogs and maximizes airflow, ensuring efficient collection of leaves and other debris.

The BC2403 also boasts a variety of user-friendly technologies that enhance usability and reduce operator fatigue. Its ergonomic design includes a padded handle and well-balanced frame, allowing for easy maneuverability. Additionally, the machine features a lightweight construction, making it easier to transport and operate in tight spaces.

Safety is a paramount concern in any commercial equipment, and the BC2403 incorporates several safety features. The machine is fitted with safety guards that prevent debris from escaping, and the engine’s design includes automatic shut-off mechanisms to prevent overheating. This commitment to safety helps ensure that operators can work confidently without the risk of accidents.

In terms of maintenance, the BC2403 is designed for ease of upkeep. It features easy-access maintenance points, making it simple to perform routine checks and servicing. This convenience helps prolong the life of the machine and ensures it remains a reliable workhorse for years to come.

In conclusion, the Billy Goat BC2403 debris loader stands out as an exceptional tool for those in need of robust performance and user-friendly features. Its powerful engine, large capacity, ergonomic design, and focus on safety and maintenance make it an essential asset for any landscaping or municipal operation striving for efficiency and effectiveness in debris management.