BC2403 Series Brush Cutter Owner’s Manual
2.Press blade clutch handle down to engage blade. Allow blade to spin up to normal operating speed.
Blade Clutch Lever
3.Pull drive clutch handle up to engage transaxle.
Drive Clutch Lever
SHUT DOWN
1.Release drive clutch handle to disengage transaxle.
2.Release blade clutch handle to disengage blade.
3.Pull throttle control all the way back to the STOP position.
4.Place the ON/OFF (I/O) switch in the OFF (O) position.
CLEARING A CLOGGED CUTTING DECK
DISCONNECT spark plug wire before servicing unit.
1.Shut engine off and wait for blade to stop completely.
2.Disconnect spark plug wire.
3.Remove clog from cutting deck.
WEAR durable gloves. Clog may contain sharp materials.
4.Reconnect spark plug wire.
Part No 500402 | 9 | F020513A |