Periodic Maintenance, Cleaning | Billy Goat BC2403 instruction

BC2403 Series Brush Cutter Owner’s Manual

MAINTENANCE

PERIODIC MAINTENANCE

Periodic maintenance should be performed at the following intervals:

Maintenance Operation	Every Use	Daily or Every 5	Every 25 Hours	Every 50	Every 100-150
		Hours		Hours	Hours

Inspect for worn or damaged parts.	z

Check for excessive vibration		z

Inspect for loose parts.		z

Sharpen blade.			z

Inspect belts for wear.			z

Lubricate throttle control cable and linkage.			z

Check blade clutch cable tension.				z

Inspect battery for corrosion, damage or leaks				z
(electric start units only).

Apply anti-seize compound to rear axles.				z

Check battery strap for excessive wear or rips	z

Replace blade drive and transaxle drive belts.					z

CLEANING

Your BILLY GOAT ® Brush Cutter should be cleaned periodically to ensure optimum performance and service life. Clogs and debris should be removed from the blade area and debris should be removed from the engine cooling fins. A garden hose or pressure washer may be used for cleaning.

DO NOT SPRAY WATER DIRECTLY ON THE BLADE CLUTCH WHEN USING A POWER WASHER. SEE FIGURE BELOW.

Part No 500360

F062210A

BC2403 specifications

The Billy Goat BC2403 is a powerful and efficient debris loader designed specifically for professional landscapers, municipalities, and grounds maintenance crews. Known for its robust performance and innovative features, the BC2403 excels in tackling a wide array of tasks such as leaf collection, brush cleanup, and general debris removal.

At the heart of the BC2403 is its powerful engine. Fitted with a reliable 305cc Honda engine, it delivers impressive power to ensure that even the heaviest debris can be handled with ease. The engine is designed to offer consistent performance while minimizing fuel consumption, making the BC2403 an economical choice for operators. Furthermore, it features a high-capacity air filter that prolongs engine life by preventing dirt and debris from entering, ensuring durability in tough working conditions.

One of the standout features of the BC2403 is its large-capacity debris bag. With a capacity of 34 bushels, it allows for extended run times before needing to be emptied. This is complemented by a high-flow, large diameter suction hose that reduces clogs and maximizes airflow, ensuring efficient collection of leaves and other debris.

The BC2403 also boasts a variety of user-friendly technologies that enhance usability and reduce operator fatigue. Its ergonomic design includes a padded handle and well-balanced frame, allowing for easy maneuverability. Additionally, the machine features a lightweight construction, making it easier to transport and operate in tight spaces.

Safety is a paramount concern in any commercial equipment, and the BC2403 incorporates several safety features. The machine is fitted with safety guards that prevent debris from escaping, and the engine’s design includes automatic shut-off mechanisms to prevent overheating. This commitment to safety helps ensure that operators can work confidently without the risk of accidents.

In terms of maintenance, the BC2403 is designed for ease of upkeep. It features easy-access maintenance points, making it simple to perform routine checks and servicing. This convenience helps prolong the life of the machine and ensures it remains a reliable workhorse for years to come.

In conclusion, the Billy Goat BC2403 debris loader stands out as an exceptional tool for those in need of robust performance and user-friendly features. Its powerful engine, large capacity, ergonomic design, and focus on safety and maintenance make it an essential asset for any landscaping or municipal operation striving for efficiency and effectiveness in debris management.