Billy Goat BC2403 owner manual Sound Data, Vibration Data, Intended USE

Page 6

BC2403 Series Brush Cutter Owner’s Manual

SOUND DATA

SOUND LEVEL 93 Dba at Operator’s position

Sound tests were conducted in accordance with 2000/14/EEC and were performed on 2/21/2002 under the conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.

General Conditions:

Sunny

Temperature:

80oF (25oC)

Wind Speed:

2.0 mph (3.2 kph)

Wind Direction:

South

Humidity:

63.5%

Barometric Pressure:

29.98” Hg (761mm Hg)

VIBRATION DATA

VIBRATION LEVEL .5g (4.87 m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on 5/19/1995 under the conditions listed below.

General Conditions:

Sunny

Temperature:

89oF (31.7oC)

Wind Speed:

6.1 mph (9.9 kph)

Wind Direction:

West

Humidity:

49.7%

Barometric Pressure:

29.88” Hg (101.19 kPa)

INTENDED USE

Your BILLY GOAT ® BC Self-Propelled Brush Cutter is designed for cutting overgrown weeds, brush and other growth down to 3½” (8.9 cm) in height. It is not a lawn mower and does not provide the quality cut of a finish cut mower. It is designed for use in rural areas and should not be operated in tight or confined areas.

Part No 500360

6

F062210A

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Billy Goat BC2403 Series Brush Cutter Contents About this ManualBC 2403 Series Specifications Common Replacement PartsSerial Plate Data General Safety Instructions and Symbols F062210A Sound Data Vibration DataIntended USE Instruction Labels Brush Cutter Assembly Drawing Assembly Instructions Disconnect spark plug wire before assembling unitReconnect spark plug wire OperationOperator Controls StartingF062210A Cutting Shut Down Clearing a Clogged Cutting DeckHandling and Transporting StorageMaintenance Periodic MaintenanceCleaning Blade Removal and Sharpening Blade Drive Belt Tension Adjustment Blade Clutch Adjustment Blade Drive Belt Removal and Replacement Front Transaxle Drive Clutch Adjustment Transaxle Cable Adjustment Reconnect spark plug wireTransaxle Drive Belt Removal and Replacement Wiring Diagrams Starter Switch WiringStarter Circuit Schematic Diagram Troubleshooting Problem Possible CauseEngine Maintenance and Repair Warranty Claim ProcedureMaintenance Record Illustrated Parts List Engine and Engine Base AssemblyDescription BC2403HEB Handlebar Assembly Description BC2403HEB Transaxle and Blade Deck Assembly F062210A Blade Drive Spindle Assembly Detail Drawing Description BC2403HEB F062210A
Related manuals
Manual 28 pages 55.69 Kb

BC2403 specifications

The Billy Goat BC2403 is a powerful and efficient debris loader designed specifically for professional landscapers, municipalities, and grounds maintenance crews. Known for its robust performance and innovative features, the BC2403 excels in tackling a wide array of tasks such as leaf collection, brush cleanup, and general debris removal.

At the heart of the BC2403 is its powerful engine. Fitted with a reliable 305cc Honda engine, it delivers impressive power to ensure that even the heaviest debris can be handled with ease. The engine is designed to offer consistent performance while minimizing fuel consumption, making the BC2403 an economical choice for operators. Furthermore, it features a high-capacity air filter that prolongs engine life by preventing dirt and debris from entering, ensuring durability in tough working conditions.

One of the standout features of the BC2403 is its large-capacity debris bag. With a capacity of 34 bushels, it allows for extended run times before needing to be emptied. This is complemented by a high-flow, large diameter suction hose that reduces clogs and maximizes airflow, ensuring efficient collection of leaves and other debris.

The BC2403 also boasts a variety of user-friendly technologies that enhance usability and reduce operator fatigue. Its ergonomic design includes a padded handle and well-balanced frame, allowing for easy maneuverability. Additionally, the machine features a lightweight construction, making it easier to transport and operate in tight spaces.

Safety is a paramount concern in any commercial equipment, and the BC2403 incorporates several safety features. The machine is fitted with safety guards that prevent debris from escaping, and the engine’s design includes automatic shut-off mechanisms to prevent overheating. This commitment to safety helps ensure that operators can work confidently without the risk of accidents.

In terms of maintenance, the BC2403 is designed for ease of upkeep. It features easy-access maintenance points, making it simple to perform routine checks and servicing. This convenience helps prolong the life of the machine and ensures it remains a reliable workhorse for years to come.

In conclusion, the Billy Goat BC2403 debris loader stands out as an exceptional tool for those in need of robust performance and user-friendly features. Its powerful engine, large capacity, ergonomic design, and focus on safety and maintenance make it an essential asset for any landscaping or municipal operation striving for efficiency and effectiveness in debris management.
Top Page Image Contents