Billy Goat FM3301EB owner manual Operation, Handling & Transporting, Storage

Page 10

FM Owner’s Manual

OPERATION

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING

STARTING

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline.

ENGINE SPEED: Controlled by throttle lever on the control console plate.

FUEL VALVE: Move fuel valve to "ON" position (when provided on engine).

CHOKE: Operated with the throttle control by moving the throttle control to the full start position.

THROTTLE: Move remote throttle control to fast position. Pull starting rope to start engine.

ELECTRIC START: Choke the engine if necessary. Pull up then push forward on the toggle switch until engine starts, then release switch to run.

1. Select desired cutting height before starting engine.

2.Be sure drive lever or blade lever are not engaged.

3.Choke if necessary.

4.Pull back on starter rope slowly until resistance is felt. Then pull cord rapidly to start. Repeat if necessary.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn blade, loose blade jam nut, loose engine or lodged foreign objects. Note: See maintenance section for proper blade jam nut torque specifications.

HANDLING & TRANSPORTING:

Using two people to lift machine is recommended. Lift holding the handle and front of deck. Secure in place during transport.

Never lift the machine while the engine is running. ENGINE MUST BE OFF while handling, lifting, or transporting the unit on or off the vehicle.

STORAGE

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Be sure engine is cool. Do not smoke. Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Run engine until fuel tank is empty and engine runs out of gasoline.

NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on stabilizer container. Run engine at least 10 min. after adding stabilizer to allow it to reach the carburetor.

CAUTION: Wheels must be chocked or blocked when unit is parked on a slope.

Part No 520187

10

Form No F010408A

Image 10
Contents Billy Goat Finish Mower Contents About this ManualSpecifications Serial Plate DataGeneral Safety Instructions and Symbols Form No F010408A Vibration Data SoundIntended USE Engine Labels Instruction LabelsThrottle Controls and Labels Packing Checklist PUT OIL in Engine Before StartingAssembly Handling & Transporting OperationStorage Cutting Height Adjustment Cutting OperationPropulsion Blade ClutchHillside Mowing Maintenance Periodic MaintenanceBelt Replacement Blade Drive BeltBelt Replacement Cable AdjustmentsBrake Puck Replacement Starter Switch WiringTroubleshooting Warranty Claim ProcedureParts Drawing FM Parts List QTYBattery is included 104 140 151 147 143 183 190 123 Label HOT Engine Belt Layout Description QTYTo Trans Description Mulching KIT P/N AccessoriesGrass Catcher KIT P/N Transaxle Guard KIT P/NMaintenance Record Form No F010408A

FM3301EB specifications

The Billy Goat FM3301EB is a powerful and versatile forced air fan designed to optimize the efficiency of various outdoor tasks. Engineered with the needs of both professionals and DIY enthusiasts in mind, this model offers a range of features that make it a standout choice in the market.

One of the key characteristics of the FM3301EB is its robust 228cc commercial grade engine, which provides substantial airflow and excellent performance. The engine is designed to deliver high airflow rates, enabling efficient operation for a variety of applications such as landscape maintenance, construction, and even debris cleanup. The powerful engine allows the fan to project air at impressive distances, making it effective for larger areas that need to be dried or cleared.

The FM3301EB boasts an ergonomically designed housing, which not only contributes to its durability but also aids in easy handling and transport. Weighing in at just around 70 pounds, it is relatively lightweight for its class, which means users can quickly move the fan to various job sites. Additionally, the rugged design ensures it can withstand the rigors of industrial use without compromising performance.

Another standout feature of the Billy Goat FM3301EB is its innovative impeller design, which enhances airflow efficiency. The fan features a specifically designed blade system that maximizes air movement while minimizing noise levels. This makes it an ideal choice for environments where noise reduction is crucial, such as residential areas or quiet job sites.

The FM3301EB also includes a variety of operational options, including adjustable airflow directions. This adaptability allows users to direct airflow exactly where it is needed, whether for drying surfaces or clearing debris. The easy-to-use controls make adjustment quick and intuitive, ensuring minimal downtime during demanding tasks.

In summary, the Billy Goat FM3301EB stands out for its powerful engine, durable construction, innovative impeller design, and user-friendly features. It's a reliable tool that offers efficiency and versatility, making it a valuable addition to the arsenal of anyone in landscaping, construction, or maintenance. Whether you are looking to enhance productivity or simply need a reliable airflow solution, the FM3301EB is crafted to deliver exceptional performance in a variety of settings.