Billy Goat FM3301EB owner manual Assembly

Page 9

FM Owner’s Manual

ASSEMBLY

NOTE: All item numbers called out in the assembly, operation, and maintenance sections of this manual can be found on Parts List (pages 15-18).

1.Cut and remove the nylon retaining straps (see figure 11-1).

2.With the console and handle assembly positioned as shown in Figure 11-3, insert the shift linkage rod (Item 31) into the shift linkage connector (Item 54).

3.To assemble the shift rod (item 31) to the shift linkage (item 54), use the roll pin in the parts/literature bag. If you’ll notice on the shift linkage, the hole is larger on one side than the other.

It will be easier to start the roll pin from the larger side, forcing it through the shift rod and the hole on the other side of the shift linkage, using a hammer or large adjustable pliers.

4.Insert one of the handle mounting bolts (Item 102) with split lock washer (Item 6) on top of flat washer (Item 184) through the rear handle mounting hole of the right side handle, and screw it into the rear handle mounting hole on the right side of engine base chassis (Item 61). Repeat this procedure for the left side using the left handle.

5.On each side of the mower, insert one of the handle mounting

bolts (Item 102) with split lock washer (Item 6) on top of flat washer (Item 184) through the hole in one end of the handle brace (Item 32), the front handle mounting hole of the handle and screw into the front handle mounting hole in the engine base chassis (Figure 11-5).

6.Attach the blade lever using the clevis pin, two washers and the pal nut from the parts bag. Align the lever to the hole on the handle and place a washer on the pin and slide it through. Then put a washer on the other side and gently tap the pal nut onto the end of the pin. (See fig. 11-7)

7.Position control cables and use 2 cable ties on each handle to secure the cables in position. The top cable tie should be 1” below the console and the lower tie should be 12” below the console (see figure 11-8 and 11-9).

8.Check the position of the shift rod guide (Item 69), and if necessary, snap it in place in the shift bracket (Item 78) as shown in Figure 11-10.

9.Put shift lever in NEUTRAL, depress the brake lever (release the brake) and carefully pull the machine back off the pallet.

10.Fill with oil and gas to the proper level and the unit is ready to mow. (A battery will also have to be installed.)

11.Read the operator’s manual.

Cable ties

 

Fig. 11-8

 

Fig. 11-9

 

 

 

 

Part No 520187

9

Fig. 11-1

Shift rod

Shift linkage

Roll Pin

Fig. 11-3

Fig. 11-4

 

Fig. 11-5

 

 

 

Fig. 11-7

Fig. 11-10

Form No F010408A

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Billy Goat Finish Mower About this Manual ContentsSerial Plate Data SpecificationsGeneral Safety Instructions and Symbols Form No F010408A Sound Vibration DataIntended USE Instruction Labels Engine LabelsThrottle Controls and Labels PUT OIL in Engine Before Starting Packing ChecklistAssembly Operation Handling & TransportingStorage Cutting Operation Cutting Height AdjustmentBlade Clutch PropulsionHillside Mowing Periodic Maintenance MaintenanceBlade Drive Belt Belt ReplacementCable Adjustments Belt ReplacementStarter Switch Wiring Brake Puck ReplacementWarranty Claim Procedure TroubleshootingParts Drawing FM QTY Parts ListBattery is included 104 140 151 147 143 183 190 123 Label HOT Engine Belt Layout QTY DescriptionTo Trans Description Grass Catcher KIT P/N AccessoriesMulching KIT P/N Transaxle Guard KIT P/NMaintenance Record Form No F010408A

FM3301EB specifications

The Billy Goat FM3301EB is a powerful and versatile forced air fan designed to optimize the efficiency of various outdoor tasks. Engineered with the needs of both professionals and DIY enthusiasts in mind, this model offers a range of features that make it a standout choice in the market.

One of the key characteristics of the FM3301EB is its robust 228cc commercial grade engine, which provides substantial airflow and excellent performance. The engine is designed to deliver high airflow rates, enabling efficient operation for a variety of applications such as landscape maintenance, construction, and even debris cleanup. The powerful engine allows the fan to project air at impressive distances, making it effective for larger areas that need to be dried or cleared.

The FM3301EB boasts an ergonomically designed housing, which not only contributes to its durability but also aids in easy handling and transport. Weighing in at just around 70 pounds, it is relatively lightweight for its class, which means users can quickly move the fan to various job sites. Additionally, the rugged design ensures it can withstand the rigors of industrial use without compromising performance.

Another standout feature of the Billy Goat FM3301EB is its innovative impeller design, which enhances airflow efficiency. The fan features a specifically designed blade system that maximizes air movement while minimizing noise levels. This makes it an ideal choice for environments where noise reduction is crucial, such as residential areas or quiet job sites.

The FM3301EB also includes a variety of operational options, including adjustable airflow directions. This adaptability allows users to direct airflow exactly where it is needed, whether for drying surfaces or clearing debris. The easy-to-use controls make adjustment quick and intuitive, ensuring minimal downtime during demanding tasks.

In summary, the Billy Goat FM3301EB stands out for its powerful engine, durable construction, innovative impeller design, and user-friendly features. It's a reliable tool that offers efficiency and versatility, making it a valuable addition to the arsenal of anyone in landscaping, construction, or maintenance. Whether you are looking to enhance productivity or simply need a reliable airflow solution, the FM3301EB is crafted to deliver exceptional performance in a variety of settings.
Top Page Image Contents