Form No F010408A

FM Owner’s Manual

WARNING: IMPORTANT! This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended.

DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling.

DO NOT store gasoline near an open flame.

DO NOT remove gas cap while engine is running.

DO NOT start or operate engine if strong odor of gasoline is present.

DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated.

DO NOT smoke while filling the fuel tank.

DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester.

DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.

DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns.

DO NOT leave equipment unattended while in operation.

DO NOT park equipment on a steep grade or slope.

DO NOT operate equipment with bystanders in or near the work area.

DO NOT allow children to operate this equipment.

DO NOT operate equipment with guards removed.

DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.

DO NOT operate equipment on slopes greater than specified in Specifications section of this manual.

DO NOT operate barefoot or wearing open sandals. Always wear substantial footwear

DO NOT place hands or feet underneath unit, or near any moving parts.

DO NOT pull mower backwards unless absolutely necessary

DO NOT operate the mower while under the influence of alcohol or drugs.

DO NOT operate mower in wet grass. Always be sure of your footing; keep a firm hold on the handle and walk; never run.

DO NOT mow on wet grass. Reduced footing could cause slipping.

DO NOT mow near drop-offs, ditches, or embankments. The operator could lose footing or balance

DO NOT mow excessively steep slopes.

DO NOT change the engine governor setting or overspeed the engine. ALWAYS Stop the blade(s) when crossing gravel drives, walks, or roads.

ALWAYS Shut the engine (motor) oft and wait until the blade comes to complete stop before removing grass catcher. ALWAYS Mow only in daylight or good artificial light.

ALWAYS Disengage the self-propelled mechanism or drive clutch on mowers so equipped before starting the engine. ALWAYS wear safety goggles or safety glasses with side shields

ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting. ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary. ALWAYS store fuel in approved safety containers.

WARNING: Important

Remove all rocks, wire, string, etc. that can present a hazard during work prior to starting.

DO identify and mark all fixed objects to be avoided during work such as sprinkler heads, water valves, limbs, or clothes line anchors, etc.

Part No 520187

FM3301EB specifications

The Billy Goat FM3301EB is a powerful and versatile forced air fan designed to optimize the efficiency of various outdoor tasks. Engineered with the needs of both professionals and DIY enthusiasts in mind, this model offers a range of features that make it a standout choice in the market.

One of the key characteristics of the FM3301EB is its robust 228cc commercial grade engine, which provides substantial airflow and excellent performance. The engine is designed to deliver high airflow rates, enabling efficient operation for a variety of applications such as landscape maintenance, construction, and even debris cleanup. The powerful engine allows the fan to project air at impressive distances, making it effective for larger areas that need to be dried or cleared.

The FM3301EB boasts an ergonomically designed housing, which not only contributes to its durability but also aids in easy handling and transport. Weighing in at just around 70 pounds, it is relatively lightweight for its class, which means users can quickly move the fan to various job sites. Additionally, the rugged design ensures it can withstand the rigors of industrial use without compromising performance.

Another standout feature of the Billy Goat FM3301EB is its innovative impeller design, which enhances airflow efficiency. The fan features a specifically designed blade system that maximizes air movement while minimizing noise levels. This makes it an ideal choice for environments where noise reduction is crucial, such as residential areas or quiet job sites.

The FM3301EB also includes a variety of operational options, including adjustable airflow directions. This adaptability allows users to direct airflow exactly where it is needed, whether for drying surfaces or clearing debris. The easy-to-use controls make adjustment quick and intuitive, ensuring minimal downtime during demanding tasks.

In summary, the Billy Goat FM3301EB stands out for its powerful engine, durable construction, innovative impeller design, and user-friendly features. It's a reliable tool that offers efficiency and versatility, making it a valuable addition to the arsenal of anyone in landscaping, construction, or maintenance. Whether you are looking to enhance productivity or simply need a reliable airflow solution, the FM3301EB is crafted to deliver exceptional performance in a variety of settings.