Blower Cone Installation | Bad Boy Mowers 48031001, PUP Series

Figure 12.

2-10 Blower Cone Installation

Thread (1) 5/16”-18 jam nut P#(K0120) onto each end of

(2)5/16”-18 x 2-1/2” HHCS P#(K0125). Now partially thread the bolts into each of the two tabs located on the blower housing. Place blower cone so the two tabs line up with the bolts then tighten completely. See Figure 13.

Figure 13.

Blower Housing Tabs

lock bushing, forcing the blade to break-away from the taper-lock bushing. If the impeller will not move, hit the base of the impeller, between each vein, with a hammer, then try again.

To Replace: Place impeller blade over the engine shaft. Slide the taper-lock bushing into the engine shaft and into the impeller blade, aligning the non-threaded holes of the taper-lock bushing to the threaded holes of the impeller blade. Fasten by using (2) 1/4”-20 x 1” HHCS Grade 8 (torque to 15 ft. lbs), (1) spacer washer and (1) 3/8”-16 x 1” HHCS Grade 8 w/ washer.

Figure 14.

Impeller Blade

Taper-Lock Bushing

	Blower Cone	Fasten w/ (2) 5/16” x 2-1/2” HHCS
	Blower Cone	(2) 5/16” Jam Nuts
		(2) 5/16” Jam Nuts

2-11 Impeller Blade

Removal/Replacement

To Remove: First remove the center 3/8” bolt and the (2) washers from the taper-lock bushing (Figure14). Next remove the (2) 1/4” bolts and place them into the threaded holes (next to the holes they were removed from). Gradually thread each bolt evenly into the taper-

PUP Series, 48031001 specifications

Bad Boy Mowers has long been synonymous with quality and power in the lawn care industry, and their PUP Series, specifically the model 48031001, is a testament to that legacy. Designed with both home users and commercial landscapers in mind, this mower brings an impressive blend of features, technologies, and user-friendly characteristics that set it apart from the competition.

At the heart of the PUP Series 48031001 is its robust engine. The mower is equipped with a powerful, reliable engine that provides sufficient torque and speed to tackle even the densest grass. This high-performance engine is teamed with a heavy-duty cutting deck, which ensures a clean and precise cut every time. The cutting deck features a unique design that enhances airflow, resulting in better grass discharge and a superior cut quality.

User comfort is a significant priority in the design of the PUP Series. The mower comes with an ergonomic seat and control setup, allowing operators to easily manage their mowing tasks without unnecessary strain. The easy-to-use control panel places all essential functions within easy reach, promoting a seamless mowing experience.

Durability is a hallmark of the Bad Boy Mowers brand, and the PUP Series 48031001 is no exception. The mower is built with a solid steel frame and high-quality components, ensuring it can withstand the rigors of regular use. Its rugged construction means that it’s not just built to last; it's built to perform, season after season.

Another key feature of the PUP Series is its enhanced maneuverability. With a compact design and a tight turning radius, this mower allows for easy navigation in tight spots around flower beds or trees, making it an excellent choice for residential properties with unique landscaping.

Moreover, the mower is designed with maintenance ease in mind. Accessible parts and a user-friendly design allow owners to perform regular maintenance tasks with minimal hassle, which is critical for keeping the mower in peak operating condition over time.

Safety features in the PUP Series 48031001 include an operator presence system that automatically shuts off the engine when the operator leaves the seat, preventing accidents and ensuring peace of mind during operation.

In conclusion, the Bad Boy Mowers PUP Series 48031001 combines power, comfort, and durability with thoughtful safety and maintenance features, making it an outstanding choice for anyone seeking a reliable and efficient mowing solution. Whether for residential or commercial use, it promises to make mowing an effortless and enjoyable task.