Bad Boy Mowers 48031001, PUP Series manual Installation/Removal Collection Bags

2-17 Installation/Removal Of	Figure 20.
Collection Bags
To install the bag onto the bag ring, first make sure the
bag ring end caps are fastened to the bag ring. Place the
seam openings of the bag onto the bag ring openings
and turn the bag until the slot bracket in the bag ring is
protruding from the opening in the bag (Figure 19). Do
this for each of three bags.
Install the completed assemblies onto the support frame
and close the plastic top. Fasten both draw latches to
hold the plastic top closed (Figure 20).
To empty the bag, remove the bag and bag ring by lifting
and sliding rearward. Grasp the loop on the bottom of
the bag, turn it upside down and empty the collected
debris (Figure 21). Repeat for the other bags. Reinstall
all bags, line with plastic bags if desired, close the plastic
top and reattach the draw latches.	Figure 21.
Plastic lawn and leaf bags, 33 gallon size, may be used
inside the cloth bags. Be sure to leave enough plastic
bag hanging over the frame so the plastic bags can be
twist tied before emptying (Figure 22).
Figure 19.

Plastic Top

Draw Latches

Bag Ring	Slot
	Bracket

Grasp Bag

Here

Figure 22.

Plastic Bag

Bag Ring	Cloth Bag
End Caps

Cloth Bag

14