Bad Boy Mowers PUP Series, 48031001 manual Lengths Of Hose Adjustment, Upper Hose Installation

Page 13

2-12 Lengths Of Hose Adjustment

The hoses in steps 2-13 and 2-14 must be cut to fit your machine. Follow steps 2-13 and 2-14. Do not cut the hoses until you have tried to fit them on your machine. Remember that the hoses have to be long enough to allow for enough clamping surface between the inlet, blower assembly, and the deck boot.

2-13 Upper Hose Installation

Fasten the inlet to the plastic top by sliding the inlet from the inside of the top to the outside and lock into place. Slide a 5”-6” upper hose clamp P#(J6011) onto both ends of the 6” upper hose (Figure 15). Then slide one end of the 6” hose onto the inlet. Make sure there is about a two-inch overlap between the hose end and the container inlet. Proceed to slide the opposite end of the 6” hose onto the outlet of the blower assembly. See Figure 15 for details. Make sure both ends of the hose are clearly attached to the inlet and the blower assembly inlet. Tighten the hose clamps.

Figure 15.

Inlet

5”-6” Hose Clamps

 

6” Upper

Hose

Figure 16.

Blower Housing

Blower Cone

 

8” Lower

Hose

7”-8” Hose

Boot

 

Clamp

 

2-14 Lower Hose To Blower Cone Installation

Slide a 7”-8” hose clamp P#(J6006) over both ends of the lower hose. Then proceed to slide the lower hose onto the blower cone. Tighten the hose clamp. The assembly should look like Figure 16.

2-15 Lower Hose To Boot Installation

Take the unattached end of the lower hose and slide it over the circular end of the boot. Use the lower hose clamp to secure the hose to the boot (Figure 16). Tip: Before securing clamp rotate hose counter-clockwise (away from yourself) approximately 1” to add in retaining boot to mower deck.

2-16 Front Weight Installation

Slide the weight bracket assembly P#(A0597) into the mower’s front receiver hitch (Figure 17). Fasten by using

(1)5/8” x 3” clevis pin P#(K0172) and (1) 5/32” x 2-5/8” hair pin clip P#(K0088). When installing the weight bar (Figure 18) P#(B2220), you should have another person help position the weight centered onto the weight bracket assembly. Fasten the weight by using (2) 1/2”-13 U-bolts P#(K0331) and (4) 1/2”-13 flange nuts P#(K1246). Tighten all nuts and bolts.

Fasten w/

Figure 17.(1) 5/8” x 3” Clevis Pin

(1) Hair Pin Clip

Figure 18.

Fasten w/

(2)

½” U-Bolts

 

 

(4)

½” Flange Nuts

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents $4.00 REV OPERATOR’S ManualPTO Grass Collection System Table of ContentsSafety Alert Symbol Safety Signs SafetyWhat is WARRANTED? Peco Limited Warranty for NEW ProductsIntroduction Section Introduction and DescriptionDescription Preparation Of MowerPTO Assembly Installation Belt Installation Mount Tube Stiffener Installation Cam Assembly AdjustmentLower Frame Installation Carriage Bolt Exploded Parts View Parts View Boot To Mower Deck Installation Upper Frame Assembly InstallationTop Assembly To Upper Frame Assembly InstallationImpeller Blade Removal/Replacement Blower Cone InstallationUpper Hose Installation Lengths Of Hose AdjustmentLower Hose To Blower Cone Installation Lower Hose To Boot InstallationInstallation/Removal Collection Bags Section Operating Instructions Section MaintenanceParts And Service Information Section Parts and ServiceLubrication Safety Decals Bad Boy Page Contact Bad Boy Today

PUP Series, 48031001 specifications

Bad Boy Mowers has long been synonymous with quality and power in the lawn care industry, and their PUP Series, specifically the model 48031001, is a testament to that legacy. Designed with both home users and commercial landscapers in mind, this mower brings an impressive blend of features, technologies, and user-friendly characteristics that set it apart from the competition.

At the heart of the PUP Series 48031001 is its robust engine. The mower is equipped with a powerful, reliable engine that provides sufficient torque and speed to tackle even the densest grass. This high-performance engine is teamed with a heavy-duty cutting deck, which ensures a clean and precise cut every time. The cutting deck features a unique design that enhances airflow, resulting in better grass discharge and a superior cut quality.

User comfort is a significant priority in the design of the PUP Series. The mower comes with an ergonomic seat and control setup, allowing operators to easily manage their mowing tasks without unnecessary strain. The easy-to-use control panel places all essential functions within easy reach, promoting a seamless mowing experience.

Durability is a hallmark of the Bad Boy Mowers brand, and the PUP Series 48031001 is no exception. The mower is built with a solid steel frame and high-quality components, ensuring it can withstand the rigors of regular use. Its rugged construction means that it’s not just built to last; it's built to perform, season after season.

Another key feature of the PUP Series is its enhanced maneuverability. With a compact design and a tight turning radius, this mower allows for easy navigation in tight spots around flower beds or trees, making it an excellent choice for residential properties with unique landscaping.

Moreover, the mower is designed with maintenance ease in mind. Accessible parts and a user-friendly design allow owners to perform regular maintenance tasks with minimal hassle, which is critical for keeping the mower in peak operating condition over time.

Safety features in the PUP Series 48031001 include an operator presence system that automatically shuts off the engine when the operator leaves the seat, preventing accidents and ensuring peace of mind during operation.

In conclusion, the Bad Boy Mowers PUP Series 48031001 combines power, comfort, and durability with thoughtful safety and maintenance features, making it an outstanding choice for anyone seeking a reliable and efficient mowing solution. Whether for residential or commercial use, it promises to make mowing an effortless and enjoyable task.
Top Page Image Contents