Axion CZT2142, ZT18533 manual Removing the Mower Deck

Page 16
Installing the Mower Deck

MOWER DECK REMOVAL & INSTALLATION - 33” DECKS

A BC

NOTE: Perform mower removal and installation on a hard, level surface such as a concrete floor.

WARNING

After lowering the mower cutting height, engage parking brake, turn off the mower blades, turn the ignition switch to STOP, and remove key before attempting to install or remove the mower.

Removing the Mower Deck

A

1.

Turn the mower blades OFF, put the ground speed

 

 

 

 

control levers in START/PARK position, engage the

 

 

D

 

parking brake, turn the ignition OFF, and wait for all

 

 

 

 

 

 

 

moving parts to stop.

 

 

 

 

 

 

2.

Pivot the front wheels forward.

 

 

 

Figure 10. Mower Hitch Components - 33” Decks

 

 

 

 

 

3.

 

ReproductioA. Engine PTO Pulleyn

 

Pull the back-side idler pulley (C, Figure 11) forward

A. Hair Pin Clips

 

 

 

to release belt tension. Remove the mower belt from

B. Rear Lift Arms

 

 

 

engine PTO pulley (A).

 

 

 

C. F nt Hitch R

d

 

4.

Turn the ignition switch from OFF to RUN without

D. 4x4 Wood Bl cks

 

 

starting the engine.

 

 

 

 

 

 

5.

Use the mower cutting height switch to raise

he

 

 

 

 

mower deck.

 

 

 

 

 

 

6.

Place 4x4 wood blocks (D, Figure 10) under

he fr nt

 

 

 

 

and rear lip of the mower deck to securely supp rt it.

 

B

 

7.

Use the mower cutting height switch to fully l

wer the

 

 

A

 

mower so that is it resting on the 4x4 wood blocks.

 

 

 

8.

Turn the ignition switch to OFF and remove the key.

 

 

 

9.

Remove the hair pin clips (A) securing the rear

 

 

 

 

mower lift arms (B) and the front hitch

(C) to the

 

 

C

 

mower deck.

 

 

 

 

 

 

 

 

 

 

 

 

10. Separate the rear lift arms from the mow

r d

ck.

E

 

 

 

Repeat on both sides of the mower.

 

 

 

 

11. Remove the front hitch rod (C) from the front hitch

brackets.

D

 

12. Slide the mower deck out from under the rider.

 

 

Figure 11. Mower Belt Routing - 33” Decks

1.Slide the mower deck under the right side of the rider. Align the holes in the front hitch brackets, and insert the front hitch rod (C, Figure 10). Secure with hair pin clip (A).

2.Connect the rear lift arms to the mower deck. Secure with hair pin clips (A).

3.Insert the key into the ignition switch. Turn the switch from OFF to RUN without starting the engine.

4.Use the cutting height switch to raise the mower until it is no longer resting on the 4x4 wood blocks (D).

5.Turn the ignition switch OFF and remove the key. Remove the 4x4 blocks (D).

6.Release mower belt tension, and install the belt as shown in Figure 11.

B.Mower Drive Belt

C.Back-Side Idler Pulley

D.Stationary Idler Pulley

E.Arbor Pulley

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual 18.5, 21, 26HP Zero-Turn RidersNot For Table of Contents Reproduction25Safety Rules General OperationIgnition System For Service & Maintenance Safe Handling of GasolineSafety & Operation Decals Safe, effective operationSample Identification NumbersOperation Control FunctionsGround Speed Levers Parking Brake Lever Engine Speed Control/ChokeGeneral Operating Safety Checks Before Starting Fuel RecommendationsEmergency Stopping Stopping the Rider & EnginePushing the Rider by Hand Starting the EngineDriving Practice Smooth TravelForward Travel Practice Reverse Travel PracticePractice Turning Around a Corner Practice Turning In PlaceExecuting Turns Executing an End-Of-Row Zero TurnRemoving the Mower Deck Installing the Mower Deck Figu e 14. Mower Belt R uti Idler Pulley Arm Wer BeltEngine Dr ve Pulley Fixed Idler PulleyMaintenance Maintenance ScheduleRider MAINTENANCE, All Models 18.5, 21HP Briggs & StrattonAccessing the Engine Compartment Service Interval 25 HoursCooling Areas and AIR Filter Check Tire PressureGrease LubricationOil Lubricating Rider Clean Deck Check / Replace Mower Blades Blade Removal 42 & 52 DeckNot DC CAOperational Safety Checks Clean the Battery and Cables Check Rider SafetySystem Win ow Check / Adjust PTO ClutchFeeler Gauge Change Engine OIL Change Engine OIL & FilterAir Filter Removal & Installation Service AIR Filter & PRE-CLEANER 18.5 & 21 HP EnginesSingle Cylinder Models Air Filter Lat Air Filter Cover Air Filter Removal Filter Cartridge Clean Combustion Chamber Briggs & Stratton Models Pre-Cleaner ServiceAir Filter Service Replace Spark PlugService & Adjustments Ground Speed Control Lever AdjustmentSpeed Balancing Adjustment Cutting Height AdjustmentBrake Adjustment Engine AdjustmentsMower Deck Leveling Adjustments Side to Side Leveling 33 DecksSide to Side Leveling 42 & 52 Decks DeckTurn the blade front-to-back as shown in Figure Front To Back Leveling 33 DeckJam Nuts hidden from view Front To Back Leveling 42 & 52 Decks Mower Drive Belt Replacement 33 Decks Mower Belt ReplacementMower Drive Belt Replacement 42 Decks Mower Deck Washout Port Arbor Drive Belt ReplacementDecks only Storage StorageBefore Storage After StorageTroubleshooting Troubleshooting the RiderTroubleshooting the Mower Specifications ChassisEngine 21HP TransmissionService Items Replacement PartsNot For Not For HOW High to MOW the Grass HOW and When to WATER, Fertilize & AerateTall Grass Requires Incremental Cutting When and HOW Often to MOW Proper Mowing SpeedNot For

ZT2142, CZT2142, ZT18533 specifications

The Axion ZT18533, ZT2142, and CZT2142 are prime examples of advanced agricultural technology, designed to enhance operational efficiency and productivity on the farm. These versatile machines represent a significant leap in the integration of power and precision farming practices.

The Axion ZT18533 is equipped with a robust engine, providing exceptional horsepower and torque for demanding farm tasks. This model boasts a high-performance transmission system that ensures seamless power delivery, allowing operators to tackle varied terrain effortlessly. Key features include advanced GPS steering technology, which enhances navigation accuracy, while the intuitive control interface ensures ease of use for operators of all experience levels.

Similarly, the ZT2142 model shines with its innovative engine design, featuring stringent emission controls to comply with modern environmental standards. This model places a strong emphasis on fuel efficiency, offering innovative technologies such as common rail fuel injection that optimize fuel delivery for improved performance. The spacious cab design, complete with ergonomic seating and controls, ensures maximum operator comfort during long operating hours, promoting productivity.

In the case of the CZT2142, this model elevates the standard with its incorporate smart technology. It features real-time monitoring systems that provide critical data on engine performance, allowing for proactive maintenance and reduced downtime. The CZT2142 is also equipped with an advanced hydraulic system that provides exceptional lift capacity and versatility in attachment use, making it suitable for various farming applications.

All models feature cutting-edge safety technology, including rollover protection and enhanced visibility through strategically designed cab windows. The integration of telematics systems across these models allows for remote monitoring and diagnostics, further contributing to efficient fleet management.

Overall, the Axion ZT18533, ZT2142, and CZT2142 represent a comprehensive solution for modern agriculture. Their blend of power, efficiency, and advanced technology makes them indispensable tools for farmers looking to optimize their operations and enhance productivity in the field. With a focus on sustainability and innovation, these models are set to redefine the standards of agricultural machinery.
Top Page Image Contents