Axion CZT2142 Clean the Battery and Cables Check Rider Safety, System, Operational Safety Checks

Page 25

CLEAN THE BATTERY AND CABLES

CHECK RIDER SAFETY

Service Interval: 100 Hours

 

SYSTEM

WARNING

 

Service Interval: Every 100 hours, every spring/fall, and

Be careful when handling the battery. Avoid

after storage of 30 days or longer.

This unit is equipped with safety interlock switches.

spilling electrolyte. Keep flames and sparks away

These safety systems are present for your safety. Do not

from the battery.

 

 

attempt to bypass safety switches, and never tamper

When removing or installing battery cables,

with safety devices. Check their operation regularly.

disconnect the negative cable FIRST and reconnect

 

 

it LAST. If not done in this order, the positive

Operational SAFETY Checks

terminal can be shorted to the frame by a tool.

TEST 1 — ENGINE SHOULD NOT CRANK IF:

 

 

Always wear safety glasses and gloves when

• Mower blades switch is ON, OR

handling batteries.

 

• Ground speed control levers are not in their

 

 

1. Disconnect the cables from the battery, negative

START/PARK positions, OR

• Parking brake lever is in DISENGAGE position.

cable first (B, Figure 32).

 

2. Remove the rubber strap securing the battery, and

TEST 2 — ENGINE SHOULD CRANK IF:

remove the battery.

Reproduction

 

• Mower blade switch is OFF, AND

3. Clean the battery and battery compartment with a

• Ground speed c

trol levers are in their

solution of baking soda and water.

START/PARK p

sitions, AND

4. Clean the battery terminals and cable ends with a

• Parking brake lever is in ENGAGE position.

wire brush until shiny.

 

TEST 3 — ENGINE SHOULD SHUT OFF IF:

5. Reinstall the battery and secure with the rubber s rap.

• Operator rises off seat with the mower blade switch

6. Reattach the battery cables: first attach the sitive

ON, OR

 

cable (see A, Figure 32), then attach the negative

• Operator rises off seat with the ground speed levers

cable (B).

 

in DRIVE positions, OR

7. Coat the cable ends and battery terminals with

• Operator rises off seat with the parking brake in

petroleum jelly or non-conducting grease.

DISENGAGE position, OR

NOTE: On models with 33” decks, the battery is mounted

• Operator moves the left and/or right ground speed

on the right side of the engine compartm nt.

control lever out of its START/PARK position with the

 

 

 

 

parking brake lever in ENGAGE position.

 

 

TEST 4 — BLADE BRAKE CHECK

 

 

The mower blades and mower drive belt should come to

 

 

a complete stop within five seconds after the mower

 

 

blade switch is turned OFF. If mower drive belt does not

 

 

stop within five seconds, contact your local authorized

 

 

dealer.

 

 

 

NOTE: Once the engine has stopped, the mower blade

 

 

switch must be turned OFF, the ground speed control

 

 

levers must be locked in their START/PARK positions,

 

 

and the parking brake lever must be in the ENGAGE

B

 

position in order to start the engine.

 

WARNING

A

 

 

 

If the unit does not pass a safety test, do not

Figure 32. Engine Compartment

 

operate it. See your local authorized dealer. Under

 

no circumstance should you attempt to defeat the

A. Positive (+) Battery Cable

 

 

purpose of the safety interlock system.

B. Negative (-) Battery Cable

 

 

 

 

25

Image 25 Axion CZT2142, ZT18533 manual Clean the Battery and Cables Check Rider Safety, System, Operational Safety Checks
Contents 18.5, 21, 26HP Zero-Turn Riders OPERATOR’S ManualNot For Reproduction25 Table of ContentsGeneral Operation Safety RulesIgnition System For Safe Handling of Gasoline Service & MaintenanceSafe, effective operation Safety & Operation DecalsIdentification Numbers SampleControl Functions OperationGround Speed Levers Parking Brake Lever Engine Speed Control/ChokeGeneral Operating Safety Fuel Recommendations Checks Before StartingStopping the Rider & Engine Emergency StoppingPushing the Rider by Hand Starting the EngineSmooth Travel Driving PracticeForward Travel Practice Reverse Travel PracticePractice Turning In Place Practice Turning Around a CornerExecuting Turns Executing an End-Of-Row Zero TurnRemoving the Mower Deck Installing the Mower Deck Wer Belt Figu e 14. Mower Belt R uti Idler Pulley ArmEngine Dr ve Pulley Fixed Idler PulleyMaintenance Schedule MaintenanceRider MAINTENANCE, All Models 18.5, 21HP Briggs & StrattonService Interval 25 Hours Accessing the Engine CompartmentCooling Areas and AIR Filter Check Tire PressureGrease LubricationOil Lubricating Rider Blade Removal 42 & 52 Deck Clean Deck Check / Replace Mower BladesDC CA NotOperational Safety Checks Clean the Battery and Cables Check Rider SafetySystem Win ow Check / Adjust PTO ClutchFeeler Gauge Change Engine OIL & Filter Change Engine OILAir Filter Removal & Installation Service AIR Filter & PRE-CLEANER 18.5 & 21 HP EnginesSingle Cylinder Models Air Filter Lat Air Filter Cover Air Filter Removal Filter Cartridge Pre-Cleaner Service Clean Combustion Chamber Briggs & Stratton ModelsAir Filter Service Replace Spark PlugGround Speed Control Lever Adjustment Service & AdjustmentsSpeed Balancing Adjustment Cutting Height AdjustmentEngine Adjustments Brake AdjustmentSide to Side Leveling 33 Decks Mower Deck Leveling AdjustmentsDeck Side to Side Leveling 42 & 52 DecksTurn the blade front-to-back as shown in Figure Front To Back Leveling 33 DeckJam Nuts hidden from view Front To Back Leveling 42 & 52 Decks Mower Drive Belt Replacement 33 Decks Mower Belt ReplacementMower Drive Belt Replacement 42 Decks Mower Deck Washout Port Arbor Drive Belt ReplacementDecks only Storage StorageBefore Storage After StorageTroubleshooting the Rider TroubleshootingTroubleshooting the Mower Chassis SpecificationsEngine 21HP TransmissionReplacement Parts Service ItemsNot For Not For HOW High to MOW the Grass HOW and When to WATER, Fertilize & AerateTall Grass Requires Incremental Cutting Proper Mowing Speed When and HOW Often to MOWNot For

ZT2142, CZT2142, ZT18533 specifications

The Axion ZT18533, ZT2142, and CZT2142 are prime examples of advanced agricultural technology, designed to enhance operational efficiency and productivity on the farm. These versatile machines represent a significant leap in the integration of power and precision farming practices.

The Axion ZT18533 is equipped with a robust engine, providing exceptional horsepower and torque for demanding farm tasks. This model boasts a high-performance transmission system that ensures seamless power delivery, allowing operators to tackle varied terrain effortlessly. Key features include advanced GPS steering technology, which enhances navigation accuracy, while the intuitive control interface ensures ease of use for operators of all experience levels.

Similarly, the ZT2142 model shines with its innovative engine design, featuring stringent emission controls to comply with modern environmental standards. This model places a strong emphasis on fuel efficiency, offering innovative technologies such as common rail fuel injection that optimize fuel delivery for improved performance. The spacious cab design, complete with ergonomic seating and controls, ensures maximum operator comfort during long operating hours, promoting productivity.

In the case of the CZT2142, this model elevates the standard with its incorporate smart technology. It features real-time monitoring systems that provide critical data on engine performance, allowing for proactive maintenance and reduced downtime. The CZT2142 is also equipped with an advanced hydraulic system that provides exceptional lift capacity and versatility in attachment use, making it suitable for various farming applications.

All models feature cutting-edge safety technology, including rollover protection and enhanced visibility through strategically designed cab windows. The integration of telematics systems across these models allows for remote monitoring and diagnostics, further contributing to efficient fleet management.

Overall, the Axion ZT18533, ZT2142, and CZT2142 represent a comprehensive solution for modern agriculture. Their blend of power, efficiency, and advanced technology makes them indispensable tools for farmers looking to optimize their operations and enhance productivity in the field. With a focus on sustainability and innovation, these models are set to redefine the standards of agricultural machinery.