Axion ZT18533, CZT2142 manual Mower Deck Washout Port, Arbor Drive Belt Replacement, Decks only

Page 38
Mower Drive Belt Replacement - 52” Decks
1. Park the rider on a level surface. Disengage the PTO, turn off the engine and set the ground speed control levers to PARK. Remove the key.
2. Remove belt covers.
3. Insert ratchet into 3/8” (9.5 mm) square hole in idler pulley arm (A, Figure 59) and pull to release belt tension.
4. Remove the mower drive belt (B) from the engine drive pulley (C).

E D F B C

E

E

5. Remove the belt from the remaining deck pulleys.

D

A

 

NOTE: It is not necessary to remove the mower deck

 

 

to replace the belt.

Figure 59. Mower Belt Routing - 52” Decks

6. Install the new mower belt as shown in Figure 59.

A. Idler Pulley Arm

 

 

B. Mower Belt

 

Arbor Drive Belt Replacement

C. Engine Drive Pulley

 

D. Fixed Idler Pulley (2)

 

Contact your local authorized dealer for replacement of

E. A bor Drive Pulley (3)

 

F. Adjustable Tensi Idler Pulley

the arbor drive belt (A, Figure 59).

 

 

MOWER DECK WASHOUT PORT

for

 

 

(52” decks only)

 

A

 

 

 

 

 

NOTE: The washout port allows you to connect a typical

 

 

 

garden hose to the trim side (L.H.) of the m wer deck to

B

 

 

remove grass and debris from the underside. This

 

 

 

 

ensures proper and safe operation of the mower.

 

 

 

 

1. Place the lawn tractor on a smooth level surface.

 

 

 

 

WARNING

Not

 

 

 

 

 

 

 

 

 

Before running the mower, make sure the hose is

 

 

 

C

properly connected and does not come into contact

 

 

 

with the blades. When the mower is running and the

 

 

 

blades are engaged, the person cleaning the mower

 

 

 

deck must be in the operator position, and there are

 

 

 

no bystanders. Failure to follow theseReproprecautions duction

 

may result in serious injury or death.

 

 

 

 

 

2.Attach the quick disconnect (A, Figure 60) to garden hose (B) and connect to washout port (C) on mower deck.

3.Turn the mower on and place in the highest cutting position.

4. Run water to remove grass and debris from

Figure 60. Mower Deck Washout Port

underside of mower deck.

A. Quick Disconnect

5. Turn the mower off.

B. Hose

 

C. Washout Port

6.Remove the garden hose and quick disconnect from the washout port when completed.

38

Image 38
Contents OPERATOR’S Manual 18.5, 21, 26HP Zero-Turn RidersNot For Table of Contents Reproduction25Safety Rules General OperationIgnition System For Service & Maintenance Safe Handling of GasolineSafety & Operation Decals Safe, effective operationSample Identification NumbersGround Speed Levers Parking Brake Lever OperationControl Functions Engine Speed Control/ChokeGeneral Operating Safety Checks Before Starting Fuel RecommendationsPushing the Rider by Hand Emergency StoppingStopping the Rider & Engine Starting the EngineForward Travel Practice Driving PracticeSmooth Travel Reverse Travel PracticeExecuting Turns Practice Turning Around a CornerPractice Turning In Place Executing an End-Of-Row Zero TurnRemoving the Mower Deck Installing the Mower Deck Engine Dr ve Pulley Figu e 14. Mower Belt R uti Idler Pulley ArmWer Belt Fixed Idler PulleyRider MAINTENANCE, All Models MaintenanceMaintenance Schedule 18.5, 21HP Briggs & StrattonCooling Areas and AIR Filter Accessing the Engine CompartmentService Interval 25 Hours Check Tire PressureOil LubricationGrease Lubricating Rider Clean Deck Check / Replace Mower Blades Blade Removal 42 & 52 DeckNot DC CASystem Clean the Battery and Cables Check Rider SafetyOperational Safety Checks Feeler Gauge Check / Adjust PTO ClutchWin ow Change Engine OIL Change Engine OIL & FilterSingle Cylinder Models Air Filter Lat Air Filter Cover Service AIR Filter & PRE-CLEANER 18.5 & 21 HP EnginesAir Filter Removal & Installation Air Filter Removal Filter Cartridge Air Filter Service Clean Combustion Chamber Briggs & Stratton ModelsPre-Cleaner Service Replace Spark PlugSpeed Balancing Adjustment Service & AdjustmentsGround Speed Control Lever Adjustment Cutting Height AdjustmentBrake Adjustment Engine AdjustmentsMower Deck Leveling Adjustments Side to Side Leveling 33 DecksSide to Side Leveling 42 & 52 Decks DeckJam Nuts hidden from view Front To Back Leveling 33 DeckTurn the blade front-to-back as shown in Figure Front To Back Leveling 42 & 52 Decks Mower Drive Belt Replacement 42 Decks Mower Belt ReplacementMower Drive Belt Replacement 33 Decks Decks only Arbor Drive Belt ReplacementMower Deck Washout Port Before Storage StorageStorage After StorageTroubleshooting Troubleshooting the RiderTroubleshooting the Mower Engine 21HP SpecificationsChassis TransmissionService Items Replacement PartsNot For Not For Tall Grass Requires Incremental Cutting HOW and When to WATER, Fertilize & AerateHOW High to MOW the Grass When and HOW Often to MOW Proper Mowing SpeedNot For

ZT2142, CZT2142, ZT18533 specifications

The Axion ZT18533, ZT2142, and CZT2142 are prime examples of advanced agricultural technology, designed to enhance operational efficiency and productivity on the farm. These versatile machines represent a significant leap in the integration of power and precision farming practices.

The Axion ZT18533 is equipped with a robust engine, providing exceptional horsepower and torque for demanding farm tasks. This model boasts a high-performance transmission system that ensures seamless power delivery, allowing operators to tackle varied terrain effortlessly. Key features include advanced GPS steering technology, which enhances navigation accuracy, while the intuitive control interface ensures ease of use for operators of all experience levels.

Similarly, the ZT2142 model shines with its innovative engine design, featuring stringent emission controls to comply with modern environmental standards. This model places a strong emphasis on fuel efficiency, offering innovative technologies such as common rail fuel injection that optimize fuel delivery for improved performance. The spacious cab design, complete with ergonomic seating and controls, ensures maximum operator comfort during long operating hours, promoting productivity.

In the case of the CZT2142, this model elevates the standard with its incorporate smart technology. It features real-time monitoring systems that provide critical data on engine performance, allowing for proactive maintenance and reduced downtime. The CZT2142 is also equipped with an advanced hydraulic system that provides exceptional lift capacity and versatility in attachment use, making it suitable for various farming applications.

All models feature cutting-edge safety technology, including rollover protection and enhanced visibility through strategically designed cab windows. The integration of telematics systems across these models allows for remote monitoring and diagnostics, further contributing to efficient fleet management.

Overall, the Axion ZT18533, ZT2142, and CZT2142 represent a comprehensive solution for modern agriculture. Their blend of power, efficiency, and advanced technology makes them indispensable tools for farmers looking to optimize their operations and enhance productivity in the field. With a focus on sustainability and innovation, these models are set to redefine the standards of agricultural machinery.