Diagram | American Standard BOULEVARD Dual Flush One-Piece Toilet

9	SEE STEP 10

	REFILL NIPPLE
	REFILL
	TUBE
	FLOAT
	CUP	HALF
		16
		14
		12
		10
		8
		6
		4
FILL		2
FILL
VALVE
VALVE	WATER LEVEL
BODY	WATER LEVEL
BODY	ADJUSTMENT
	ROD
ADJUSTABLE
HEIGHT
	SHANK
	WASHER
LOCK NUT	THREADED	Diagram 1
	SHANK	Diagram 1

Rod Adjustment

SEE STEP 11

IMPORTANT:

Refill Float Adjustment

If short flush does not refill the bowl, turn thumbscrew CCW 1 turn, flush, repeat if necessary.

Install and adjust push button rods for about 1/16" (1-1/2mm) clearance between rod end and valve button.

SEE STEP 11 - TIPS

Turn on water supply. Submerge the FLOAT CUP under the water for 30 seconds. Adjust the water to desired level by turning WATER LEVEL ADJUSTMENT ROD and moving FLOAT CUP up or down.

11	FLUSH PUSH BUTTONS
	• The large flush button should line up over the	LARGE FLUSH BUTTON	SMALL FLUSH BUTTON
	white actuator on the flush tower in the tank.	LARGE FLUSH BUTTON	SMALL FLUSH BUTTON
	white actuator on the flush tower in the tank.	FOR SOLID WASTE	FOR LIQUID WASTE
		FOR SOLID WASTE	FOR LIQUID WASTE
	• The small flush button should line up over the	1.6 gal/flush	1.1 gal/flush
	• The small flush button should line up over the	6 Liter/flush	4.1 Liter/flush
	gray actuator on the flush tower in the tank.	6 Liter/flush	4.1 Liter/flush
	gray actuator on the flush tower in the tank.
	• Pressing both buttons at once will result in a
	short flush.

TIPS:

With the lid removed, directly press the flush button in the tank to confirm that the toilet is working properly. If not, follow troubleshooting guide.

1. Install Threaded Rods into holes in bottom of push buttons approximately 1/2" (12mm).

2. Lightly snug Locking Nut.

3. Place Lid on Tank.

Locknuts

4. Push Button to test flush. If more stroke is needed, loosen Locknut and turn Threaded Rod counterclockwise one (1) turn.

5. Replace Lid. Repeat until flush action is achieved.

Threaded Rods

6.If Valve stays open, turn Threaded Rod clockwise one (1) turn and lightly snug Locknut.

12CARE AND CLEANING

When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may damage the seat's finish.

!WARNING: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This damage can cause leakage and property damage.

American Standard shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine (calcium hypochlorite).

- 3 -

7301690-100 Rev. E

BOULEVARD Dual Flush One-Piece Toilet, 2891 specifications

The American Standard 2891, Boulevard Dual Flush One-Piece Toilet is an exemplary blend of style, efficiency, and innovative technology, catering to the modern bathroom's demands. This toilet is designed for maximum functionality while maintaining a sleek aesthetic that complements various bathroom decors.

One of the standout features of the Boulevard toilet is its dual flush system. This technology provides users with the option of a full flush or a reduced flush, allowing for greater water conservation. The full flush option typically uses 1.6 gallons per flush (GPF), while the reduced flush uses only 0.92 GPF. This not only helps in preserving water resources but also translates to lower water bills, making it an environmentally friendly choice.

The one-piece design of the Boulevard toilet is a significant advantage, offering a seamless look that is easier to clean. Traditional two-piece models often have crevices where dirt and grime can accumulate, but the streamlined nature of this design simplifies maintenance and upkeep. The smooth, compact form also fits comfortably in smaller spaces without sacrificing style or comfort.

With respect to performance, the Boulevard toilet comes equipped with American Standard’s patented siphon jet flushing system. This system ensures a powerful flush with every use, effectively clearing waste while maintaining efficient water usage. Additionally, it features a large trapway that helps prevent clogs and enhances drainage efficiency.

In terms of comfort, the Boulevard toilet includes a comfortable height design, making it easier for individuals of all ages to sit down and stand up. The seat height mimics that of a standard chair, which is especially beneficial for those with mobility issues, providing a more natural seating position.

Moreover, the Boulevard toilet is designed with a EverClean surface, which inhibits the growth of stains and odors from bacteria, mold, and mildew. This innovative coating helps maintain the toilet’s pristine appearance with minimal effort.

In conclusion, the American Standard 2891, Boulevard Dual Flush One-Piece Toilet combines modern technology with thoughtful design, promoting both efficiency and style. Its dual flush capability, one-piece construction, robust performance, comfort height, and easy-to-clean surface make it an ideal choice for anyone looking to upgrade their bathroom experience.

SEE STEP 10

Diagram 1