RONDO™
HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS
7242.XXXW
SERIES WHIRLPOOL
INSTALLATION INSTRUCTIONS
●RECOMMENDED FITTING | 165mm | ||
LOCATION 64 X 279mm | |||
| |||
|
| ||
267mm |
|
| |
|
| ||
1067mm | PUMP | ||
|
| ||
(42) |
| ON/OFF | |
|
| SWITCH | |
1816mm
908mm
76mm
(3)C/L OF DRAIN
229 X 305mm (9 X 12) CUTOUT
THANK YOU...
for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.
To insure maximum performance and pleasure from this product, please follow the instructions and cautions.
PROVIDE ACCESS
TO PUMP FOR SERVICE ON ALL INSTALLATIONS
C/L OF
OVERFLOW
95mm
83mm
38mm 
▲OUTLINE OF
CUTOUT |
|
|
| ■LEVELING STRINGER | ||
|
|
| NOT FOR SUPPORT | |||
REMOVABLE BLANK |
|
|
|
|
| 51mm |
|
|
|
|
|
| |
|
|
| (2) | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
495mm
546mm
ROUGH
List of Optional Components (not included):
•
List of Required Components (not included):
• Drain 1583.470* • Bath Filler*
* see your Home Depot Retailer
38 mm
FLOOR
TAILPIECEINTEGRAL FEET
GENERAL SPECIFICATIONS FOR 7242 WHIRLPOOL
INSTALLED SIZE |
|
| |||||||||||||||||||||
|
| ||||||||||||||||||||||
WEIGHT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 94 Lbs.(43 Kg.) | ||||
WEIGHT w/WATER |
|
|
|
|
|
|
|
|
|
|
| 818 Lbs.(371 Kg.) | |||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||||||
GAL. TO OVERFLOW |
|
|
|
|
|
|
|
|
|
|
|
|
| 87 Gal. (330 L) | |||||||||
WHIRLPOOL MIN. OPERATING VOL. |
|
|
|
|
|
|
|
| 67 Gal. (254 L) | ||||||||||||||
|
|
|
|
|
|
|
| ||||||||||||||||
BATHING WELL AT SUMP |
|
|
|
|
| 45 x 25 In. (1143 x 635mm) | |||||||||||||||||
BATHING WELL AT RIM |
|
|
|
|
|
| 60 x 30 In. (1524 x 762mm) | ||||||||||||||||
WATER DEPTH TO OVERFLOW |
|
|
|
|
|
| |||||||||||||||||
|
|
|
|
|
| ||||||||||||||||||
FLOOR LOADING |
|
|
|
|
| 39 Lbs./Sq.Ft. (191 Kgs./Sq.m) | |||||||||||||||||
|
|
|
|
| |||||||||||||||||||
(PROJECTED AREA) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
PTS. |
|
|
|
|
|
|
|
|
|
|
|
| 30.3 | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
CUBE (FT3) |
|
|
|
|
|
|
| 58.7 | |||||||||||||||
|
|
|
|
|
|
| |||||||||||||||||
|
|
|
| WHIRLPOOL ELECTRICAL SPECIFICATIONS | |||||||||||||||||||
PUMP |
|
|
|
|
|
|
| 2.1 HP, 14.4 AMPS,120. | |||||||||||||||
|
|
|
|
|
|
| |||||||||||||||||
GENERAL INSTALLATION INFORMATION
List of Required Tools and Supplies:
Tools | Supplies | ||
• | Level | • | Nails |
• | Tape Measure | • | Putty |
• | Pipe Wrench | • | Caulking (waterproof) |
• | Slip Joint Pliers | • | 1 x 3 or 2 x 2 |
• | Screw Driver |
| Stringers |
• | Standard | • | Drop Cloth |
| Woodworking Tools | • | 20 amp GFI |
• | Personal Safety |
| Outlet |
| Equipment | • | Cement, Plaster, |
• | Caulking Gun |
| Grout |
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
© American Standard Inc. 2003