Meridian Audio 808.2I manual Playing a disc, To play the disc, To restart the current track

Page 13

Playing a disc

Using the 808.2

Signature Reference

CD Player

The compact disc player allows you to play an entire disc, or start playing from any track. While a disc is playing you can go back to the start of the track or skip to the start of the next track.

If you have programmed a selection, these functions also work with the selection of tracks you have programmed. For information about programming see Programming a selection, page 13.

If you have other Meridian sources you should ensure that the 808.2 is the currently selected source.

To play the disc

•Press > (front panel or remote). The display will show your selection.

For example:

Play

l

The display will then show the track number and elapsed time.

For example:

1

00:12

To restart the current track

•Press [ (front panel or remote).

To move to the next track

•Press > (front panel or remote).

To play starting from a particular track

•Press ] or [ (front panel or remote) to step through the track numbers until the track you want to play is displayed, or type the number of the track (remote only).

For example:

Track

4

After a short delay the track you have selected will start to play.

Image 13

Contents 808.2/808.2i Signature Reference CD Player User Guide Safety warnings Important safety instructionsTo avoid overheating To avoid interferenceContents Sales and service in the USA Sales and service in the UKCopyright and acknowledgements Designed and manufactured in the UKIntroduction Integrated preamplifier Signal ProcessingSystem integration Drive SpecificationsAudio in and out ControlsIntroduction Using the 808.2 Signature Reference CD Player Signature Reference CD Player Front panel keysOFF MSR+ keysTo switch on from standby Switching on and offTo switch to standby To insert a discTo play the disc Playing a discTo restart the current track To move to the next trackTo continue after pausing Stopping and pausing playTo stop playback To pause playbackTo cancel the repeat function To cancel A-B repeatRepeat To continuously repeat a discTo scan through a disc Scanning a disc1237 To make a selection by adding tracks To choose a track to programmeTo make a selection by omitting tracks To add or remove a track from a selectionTo display the phase setting Changing the absolute phase+ Phase To change the phase settingTo change the contrast or brightness Changing the front-panel displayTo change the displayed information Using Signature Reference CD Player Using the CD player preamplifier features To select a source Selecting a sourceRadio To change the volume Adjusting the system volumeTo restore the sound To mute the soundTo change the balance Changing the balanceBalance Installing the CD player Back panel UnpackingAudio inputs 808.2i only Audio outputsCommunications connections To connect to an analogue preamplifier Type 1 or ApplicationsSpeakerLink lead DSP loudspeaker Slave M5 lead To connect the 808.2/808.2i to a power amplifier Type 0 or Series, 500 Series, or 800 Series unit Configuring the CD player To select a standard setting Choosing a standard settingType To turn on Gain mode Setting up sourcesTo turn off Gain mode To adjust the sensitivity of a sourceConfiguring the CD Player Index Unpacking Volume, adjusting