LOCATION OF CONTROLS
FRONT PANEL | 18 | 17 |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
1.MAIN POWER button - Press to switch the set on or off. NOTE: This button must be on in order to be able to use
the REMOTE control.
2.STANDBY indicator - This indicator has 2 colors: red and green (red is standby, green is on). When the set is off (standby), pressing the SOURCE or MASTER VOLUME buttons on the main unit, or pressing any button on the REMOTE CONTROL will turn the set on. The indicator will become green. Also this indicator will flash confirming that you pressed any button on the REMOTE CONTROL.
3.DVD indicator - For DVD sound use, press the SOURCE button till this lights or press the DVD button on your REMOTE control.
4.TUNER indicator - For AM/FM TUNER sound use, press the SOURCE button till this lights or press the TUNER button on your REMOTE control.
5.GAME indicator - For TV GAME or VIDEO CAMERA use, press the SOURCE button till this lights or press the GAME button on your REMOTE control.
6.TV/VCR indicator - For TV/VCR sound use, press the SOURCE button till this lights or press the TV/VCR button on your REMOTE control.
7.AUX indicator - For AUX IN sound use, press the SOURCE button till this lights or press the AUX button on your REMOTE control.
8.STEREO indicator - In STEREO mode, this red indicator lights up (for 2 channel sound).
9.MULTI CHANNEL DECODING indicator - When the input source is Dolby Digital, DTS or PRO LOGIC, this blue indicator lights up (for 5.1 channel sound).
10.VOLUME indicators - These indicators light up showing the level of the master volume.
11.MUTE indicator - In mute mode, this indicator will light.
12.VIDEO IN jack - For connection of a video signal from a TV game or video camera (see details on Page 16 & 17).
13.AUDIO LEFT jack - Connect to the left channel audio output of a TV game or video camera.
14.AUDIO RIGHT jack - Connect to the right channel audio output of a TV game or video camera.
15.MASTER VOLUME UP & DOWN control - Increases or decreases the volume level of all speakers.
16.PHONES jack - For connecting stereo headphones.
17.REMOTE CONTROL SIGNAL sensor - Receives the signal from the REMOTE CONTROL (Aim the REMOTE control towards this sensor).
18.SOURCE button - Press several times to select the sound input source you want: DVD, TUNER, GAME, TV/VCR, or AUX.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| 13 | BACK PANEL |
|
|
|
|
|
| 7 | 8 | 9 | 10 | 11 | 12 |
1.FRONT RIGHT SPEAKER jacks - Connect the FRONT RIGHT SPEAKER to the red and black terminals.
2.FRONT LEFT SPEAKER jacks - Connect the FRONT LEFT SPEAKER to the red and black terminals.
3.CENTER SPEAKER jacks - Connect only the CENTER SPEAKER to the blue and black terminals.
4.REAR RIGHT SPEAKER jacks - Connect the REAR RIGHT SPEAKER to the grey and black terminals.
5.REAR LEFT SPEAKER jacks - Connect the REAR LEFT SPEAKER to the grey and black terminals.
6.SUBWOOFER SPEAKER jacks - Connect the SUBWOOFER SPEAKER to the green and black terminals.
7.TUNER AUDIO INPUT jacks - Connect to the audio output of your AM/FM TUNER.
4
8.AUX AUDIO INPUT jacks - Connect to the audio output of a tape deck or other component.
9.TV/VCR AUDIO INPUT jacks - Connect to audio output of a TV or VCR.
10.DVD AUDIO INPUT jacks - Connect to the digital (coaxial) audio output of a DVD player to have Dolby Digital, DTS 5.1 channel surround sound.
11.VIDEO OUT jack - Connect to your TV’s video input jack. (If your TV has no VIDEO jack, you have to buy a VIDEO RF MODULATOR.)
IMPORTANT: This jack is only used if you are connecting a TV GAME or VIDEO CAMERA to the set.
12.AC LINE CORD - Connect to a 120V/60Hz AC standard wall outlet.
13.DVD VIDEO IN jack - Connect to your DVD’s video out jack.