REMOTE CONTROL OPERATION
Battery Installation | Remote Control Operating Range |
Remove the BATTERY COMPARTMENT DOOR of the REMOTE CONTROL and insert 2 size “AAA” alkaline batteries (included)
according to the + and 
markings inside the BATTERY COMPARTMENT of the REMOTE CONTROL unit.
Gently push here and slide to open the BATTERY DOOR.
Insert the 2 size “AAA” batteries as shown (included).
Remember, the spring touches the 
side of each battery.
Point the REMOTE CONTROL unit within 20 feet from the remote control sensor and facing the front of the HOME THEATER SYSTEM.
Remember to point the
REMOTE CONTROL in the direction of the HOME THEATER’s sensor, not the TV set or the DVD player.
H T
Point the REMOTE CONTROL at the
Home Theater’s Front
Make sure there is a clear path between the REMOTE
Replace the door.CONTROL and the HOME THEATER SYSTEM so that the signal is not blocked.
Tips on Battery Use
•Reversing polarities will damage the batteries and possibly your REMOTE. Be sure to follow polarity + and - as indicated.
•Do not mix different types of batteries together (Alkaline,
•When not in use for an extended period of time (over 60 days), remove the batteries to prevent possible acid leakage or corrosion resulting in possible damage to your REMOTE CONTROL.
•When the batteries have become discharged, they must be disposed of in a safe manner that complies with all applicable laws.
•Installation of batteries should only be done by an adult (for safety).
Tips on REMOTE CONTROL operation
•The REMOTE control’s operating distance may vary according to the brightness of the room.
•Do not point bright lights at the REMOTE CONTROL SENSOR (like laser pointers).
•Do not place objects between the REMOTE CONTROL unit and the REMOTE CONTROL SENSOR.
•Do not use this REMOTE CONTROL while simultaneously using the remote control unit of any other equipment, the signals may mix.
•Sometimes your TV’s remote may cause an LED to flash, you can ignore this.
6 |
| |
|