Alamo 4211 MSL manual Loader Pre-Operation Inspection and Service

Page 58
(SG-15)
(SG-34)
(SG-21)

OPERATION

OPERATION

6.2 Loader Pre-Operation Inspection and Service

Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.

Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hose connections. Relieve hydraulic pressure before performing maintenance or repairs. Use gloves and eye protection when servicing hot components. Contact with a hot surface or fluid can cause serious injury from burns or scalding.

Do not operate this Equipment with hydraulic oil or fuel leaking. Oil and fuel are explosive and their presence could present a hazard. Do not check for leaks with your hand! High-pressure oil streams from breaks in the line could penetrate the skin and cause tissue damage including gangrene. To check for a hose leak, SHUT the unit ENGINE OFF and remove all hydraulic pressure. Wear oil impenetrable gloves, safety glasses and use Cardboard to check for evidence of oil leaks. If you suspect a leak, REMOVE the HOSE and have it tested at a Dealer. If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure.

Before operation, a complete inspection and service is required to ensure the loader is in a good and safe

working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the loader is ready for operation, conduct the following. OPS-L-0027

4211-4211SS MSL 01/11

Operation Section 4-12

© 2011 Alamo Group Inc.

Page 57 Page 59
Image 58
Page 57 Page 59
Contents 4211 MSL To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices4211-4211SS MSL 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 Safety Safety 4211-4211SS MSL 01/11 Safety Section SL-33 Safety Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesDecal Location QTY Level Description Decal Description Loader Positions 4211-4211SS MSL 01/11 Safety Section Loader Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Assembly InstructionsAssembly Proper Rear Ballasting and Wheel Spacing Dismounting Loader and Mounting Loader to Tractor Dismounting LoaderAttaching Pin on Bucket Mounting LoaderMounting and Dismounting Attachment Mounting Attachment to LoaderAssembling Quick Attach Device Installing Quick Attach Device When Connecting an Attachment to the Loader Quick Hitch Assembly Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Rops and Seat Belt Tractor RequirementsTractor Lighting and SMV Emblem Getting On and Off the Tractor Tractor BallastBoarding the Tractor Dismounting the TractorStarting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/ServiceLoader Pre-Operation Inspection and Service Mount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Operating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation Operation SL-33 Operation Operating the Loader Filling the BucketOperation Lifting the Load Carrying the Load Dumping the Bucket Lowering the BucketOperating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Transporting the Tractor and Implement Loader StorageShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Troubleshooting Guide Page Maintenance Section Maintenance 4211-4211SS MSL 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Cylinder Service Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly StorageStore loader with attachment securely attached Proper Torque for Fasteners Maintenance Maintenance Rhino To the OWNER/OPERATOR/DEALER MSL 4211SS MSL Loader

4211 MSL specifications

The Alamo 4211 MSL stands out in the realm of compact RVs, blending functionality with innovative design to ensure an enjoyable travel experience. This model is specifically engineered to cater to the needs of outdoor enthusiasts, offering a harmonious balance of comfort and versatility.

One of the main features of the Alamo 4211 MSL is its spacious and thoughtfully designed interior. With a layout that optimizes the available space, it offers sleeping accommodations for up to four people, making it perfect for small families or groups of friends. The well-appointed kitchen includes modern appliances, such as a two-burner stove, a microwave, and a refrigerator, enabling travelers to prepare home-cooked meals on the road. Additionally, ample storage compartments throughout the unit provide practical solutions for organizing gear and personal items.

In terms of technology, the Alamo 4211 MSL incorporates advanced features that enhance the travel experience. An integrated entertainment system with Bluetooth capabilities allows occupants to enjoy their favorite music or movies, while LED lighting ensures energy efficiency and brightens the space. The model also comes with a comprehensive control panel, giving users the ability to monitor and manage various systems with ease, including water levels and battery status.

One of the standout characteristics of the Alamo 4211 MSL is its robust construction and user-friendly design. The exterior is built with durable materials, ensuring that it can withstand the rigors of outdoor adventures. The inclusion of high-quality insulation keeps the interior comfortable in various weather conditions, whether it be hot summers or cold winters.

The innovative pop-up roof feature is another notable aspect, allowing for increased headroom and a more spacious feel within the living area. This versatility makes it easier to enjoy activities inside the RV, whether it’s playing games or relaxing after a day of exploration.

Furthermore, the Alamo 4211 MSL's lightweight design contributes to better fuel efficiency and ease of towing. Its compact size enables access to more remote and scenic locations while still providing the comforts of home.

In conclusion, the Alamo 4211 MSL is a thoughtfully designed RV that caters to the needs of travelers seeking adventure without compromising on comfort. With its ideal combination of space, technology, and construction quality, it promises a rewarding experience for both seasoned RVers and newcomers alike.
Top Page Image Contents