Agri-Fab 45-0346 owner manual Operation, Maintenance, Nylock Hitch NUT Mount Arms

Page 9

ENGLISH

OPERATION

Aerating involves cutting small holes in the soil to create small reservoirs that will bring oxygen, fertilizer and water down into the root zone. For best performance of the spike aerator attachment, the following lawn preparation and aerator operation is recommended.

Spike points are sharp. Exercise caution at all times when spike points are rotating or when points are being handled.

1.To level the spike tray after the aerator is attached to the tractor hitch, loosen the nylock nuts holding the hitch mount arms to the brackets at the rear of the tray. Make the tray as level as possible and then retighten the nuts.

See figure 16.

NYLOCK

HITCH

NUT

MOUNT

 

ARMS

FIGURE 16

10.Aerate in an up and down direction on slopes.

11.To increase depth of spike point penetration, add weight to the tray as necessary.The tray holds concrete blocks or patio blocks at approximately 35 lbs. each. Secure the weights with straps or wire using the holes in the tray flange. See figure 17.

12.If the ground is extremely hard and dry, it should be sprinkled or watered down for one to two hours prior to use of the aerator.

13.Do not aerate if the ground is too wet (muddy).

FIGURE 17

2.The spike tray may be raised to the transport position by pushing the lift handle backward.

3.The spike tray may be lowered to the working position by moving the lift handle forward.

4.Mow the lawn and remove loose clippings prior to use of the aerator.

5.Start the tractor engine with controls in neutral and then place throttle at a slow engine speed.

6.Engage the shift lever in lowest possible forward speed and then lower the aerator, allowing spike points to enter the ground. Increase speed as conditions permit.

7.Aerate in the straightest line possible.

8.Make overlapping passes to increase density of the spike point pattern.

9.To prevent damage to lawn, do not make sharp turns while spike points are engaged in ground.

MAINTENANCE

1.Before each use check all nuts and bolts for tightness.

2.Lubricate wheels as needed.

3.If rust appears on shield or spikes, sand lightly and coat with enamel paint.

4.Store in a dry area and coat exposed metal with light oil when not in use.

5.Spike points can be periodically sharpened with a small grinder to maintain good soil penetration. Points should be removed for sharpening.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Spike Aerator English Hardware Pack Shown Full Size Not Shown Full SizeSlopes Safety RulesTools Required for Assembly Assembly InstructionsFront View Rear ViewDisk HUB Flat Washer Spike Reversed Short Spacer Long Do not tighten yet. See figure Grip Maintenance OperationNylock Hitch NUT Mount Arms Montaje Normas DE SeguridadApriete los tornillos y las tuercas instalados en el paso Operacion MantenimientoNylock Assemblage SécuritéVoir la figure Écrous DE Bloucage Bras DE Montage SIX Pans ’ATTELAGE FonctionnementPage Spike Aerator Model 45-0346 Repair Parts Page Page Repair Parts

45-0346 specifications

The Agri-Fab 45-0346 Tow Behind Broadcast Seeder is an innovative piece of equipment designed for both residential and commercial landscaping applications. This high-capacity seeder provides an efficient way to spread seed, fertilizer, and other materials across lawns, gardens, and fields, making it a valuable tool for anyone looking to cultivate healthy vegetation.

One of the standout features of the Agri-Fab 45-0346 is its large 130-pound hopper capacity, enabling users to cover more ground without the need for frequent refills. This is particularly advantageous for users with expansive lawns or larger areas that require seeding. The seeder design allows for a broad spread pattern of up to 10 feet, ensuring even distribution of materials without missing spots or overlapping excessively.

A key characteristic of the Agri-Fab 45-0346 is its adjustable drop rate, which provides flexibility in application. Users can customize the seeding rate based on the specific type of seed or fertilizer being used, allowing for precision and optimal results. Additionally, the hopper has a built-in agitator that keeps seeds evenly mixed, reducing the risk of clumping and promoting uniformity during application.

The Agri-Fab 45-0346 is equipped with a durable, heavy-duty polyethylene construction that withstands the rigors of outdoor use, making it a reliable investment for years to come. The seeder is also designed to be easily towable behind garden tractors or ATVs, enhancing its utility and making it accessible to users with various types of lawn equipment.

For added convenience, the seeder features a simple flow control lever that allows for quick adjustments while in the field. This user-friendly design ensures that anyone, regardless of experience level, can operate the Agri-Fab 45-0346 effectively.

In summary, the Agri-Fab 45-0346 Tow Behind Broadcast Seeder combines high capacity, adjustable settings, and durable construction, making it an excellent choice for anyone looking to efficiently seed large areas. Its innovative features and reliable performance contribute to its status as a must-have tool for both lawn care enthusiasts and professional landscapers alike.
Top Page Image Contents