Assembly Instructions, Front View, Rear View

ENGLISH

ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED FOR ASSEMBLY

(2)1/2" wrenches

(1)9/16" wrenches

(1)3/4" wrench or adjustable wrench

Before assembling the aerator, lay out all of the parts and hardware as shown on the previous pages.

(O) ANGLE HITCH ARM BRACKET MOUNT

BRACKET

(G) 5/16" NYLOCK NUT

(D) 5/16" x 1"

HEX BOLT

Spike points are sharp. Exercise caution when handling and working near spike disks.

1.Assemble the end plates to the inside slots at each end of the tray using two 5/16" x 1" hex bolts (D) and 5/16" nylock nuts (G) per end plate. Do not tighten yet. See figure 1.

2.Assemble the lift plate (P) and the axle support bracket to the tray using four 5/16" x 1" hex bolts (D) and 5/16" nylock nuts (G). Do not tighten yet. See figure 1.

(D) 5/16" x 1"
HEX BOLT	(D) 5/16" x 1"
	(D) 5/16" x 1"
	HEX BOLT
(P) LIFT PLATE
	(G) 5/16" NYLOCK NUT
AXLE
SUPPORT
BRACKET
FIGURE 1	FRONT VIEW

3.Turn the tray upside down as shown in figure 2 so that the rear of the tray (four holes in the bottom) is facing you. Assemble two hitch arm mount brackets and two angle brackets (O) to the bottom of the tray using four 5/16" x 1" hex bolts (D) and 5/16" nylock nuts (G). Do not tighten completely. See figure 2.

FIGURE 2

REAR VIEW

4.Pivot the end plate on your right side down out of the way. Place the long end of the axle, measured from the middle blind hole, through the pivot plate on your left side. (If there are two middle holes, use the hole that is in alignment with the end holes.) Fit the middle hole in the axle down onto the tab on the axle support bracket.

See figure 3.

5.Assemble the following parts in sequence onto the short end of the axle (as shown in figure 3):

a.A flat washer (H), short spacer (N), disk hub (L) and spike disk

b.A long spacer (M), disk hub (L) and spike disk.

c.A long spacer (M), disk hub (L) and spike disk.

d.A long spacer (M), disk hub (L) and spike disk.

e.A long spacer (M), disk hub (L) and spike disk.

f.Two short spacers (N), a disk hub (L) and spike disk.

g.A short spacer (N).

(H) FLAT		(L) DISK	SPIKE	(N) SHORT
WASHER		HUB	DISK	SPACER
(N) SHORT		(M) LONG
(N) SHORT		SPACER
SPACER		SPACER
SPACER
			SHORT		END
			SHORT
LONG	END
LONG
			AXLE SUPPORT
			BRACKET
HOLE			TAB
FIGURE 3					REAR VIEW

45-0346 specifications

The Agri-Fab 45-0346 Tow Behind Broadcast Seeder is an innovative piece of equipment designed for both residential and commercial landscaping applications. This high-capacity seeder provides an efficient way to spread seed, fertilizer, and other materials across lawns, gardens, and fields, making it a valuable tool for anyone looking to cultivate healthy vegetation.

One of the standout features of the Agri-Fab 45-0346 is its large 130-pound hopper capacity, enabling users to cover more ground without the need for frequent refills. This is particularly advantageous for users with expansive lawns or larger areas that require seeding. The seeder design allows for a broad spread pattern of up to 10 feet, ensuring even distribution of materials without missing spots or overlapping excessively.

A key characteristic of the Agri-Fab 45-0346 is its adjustable drop rate, which provides flexibility in application. Users can customize the seeding rate based on the specific type of seed or fertilizer being used, allowing for precision and optimal results. Additionally, the hopper has a built-in agitator that keeps seeds evenly mixed, reducing the risk of clumping and promoting uniformity during application.

The Agri-Fab 45-0346 is equipped with a durable, heavy-duty polyethylene construction that withstands the rigors of outdoor use, making it a reliable investment for years to come. The seeder is also designed to be easily towable behind garden tractors or ATVs, enhancing its utility and making it accessible to users with various types of lawn equipment.

For added convenience, the seeder features a simple flow control lever that allows for quick adjustments while in the field. This user-friendly design ensures that anyone, regardless of experience level, can operate the Agri-Fab 45-0346 effectively.

In summary, the Agri-Fab 45-0346 Tow Behind Broadcast Seeder combines high capacity, adjustable settings, and durable construction, making it an excellent choice for anyone looking to efficiently seed large areas. Its innovative features and reliable performance contribute to its status as a must-have tool for both lawn care enthusiasts and professional landscapers alike.

ENGLISH