Antari Lighting and Effects LCU-1 user manual

Page 3

Keep this device dry.

For inside use only. Not designed for outside use.

For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine that the unit is installed at the rated voltage.

Keep Liquid Control Unit upright.

Turn off or unplug when not in use.

This machine is not water- or splash-proof. If moisture, water, or fog liquid gets inside the housing, immediately unplug the unit and contact a service technician or your ANTARI dealer before using it again.

No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.

Danger of burns

For adult use only. Liquid Control Unit must be installed out of the reach of children. Never leave the unit running unattended.

Locate the fog machine in a well-ventilated area. In order to guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the unit.

Keep flammable materials at least 50 cm away from the Unit

Always allow your ANTARI Liquid Control Unit to cool down before attempting to clean or service it.

Danger of explosion

Never add flammable liquids of any kind (oil, gas, perfume) to the Liquid Control Unit.

3

Image 3
Contents Page Antari LCU-1 Liquid Control Unit Page Unpacking & Inspection SetupOperation Maintenance Read and save these instructions C08LCU1