Countax manual Cutter Drive Belt C Series Garden Tractor, Please Note Warning

Page 13

Cutter - Drive Belt - C Series Garden Tractor

Before carrying out tests or adjustments (the problem maybe simpler) – first check the following points:

1.Is the Engine to Cutter Drive Belt slipping? Check that the Drive Belt Tension Lever (fig 13) under the left running board is in the tensioned position. If not, rectify – this is the most likely cause of Cutter failure.

2.Has debris collected in the Cutter Deck Pulley Housing? If so, remove the cover and remove the obstruction.

ENGINE TO CUTTER DRIVE BELT TENSION

The correct tension of the Cutter Drive Belt (Engine to Deck) is critical. If incorrectly set it can lead to engine damage.

To check the tension, follow procedure:

1.Put the deck in a middle cutting height position (5 on the HE illuminated indicator).

2.Select a midway position on the Belt between the front (Electric Clutch) pulley and rear (Cutter Deck) pulley and using a spring balance; apply a 2Kg (4-5lbs) pull (fig 26).

3.Using a ruler or tape, measure the deflection achieved which must be 13mm (1/2"). If more, the belt tension must be increased, if less – decreased.

To correct the tension, follow this procedure:

1.Release the tension on the belt by pulling the Belt Tension Lever (page 7, fig 13) forward.

2.Taking care not to burn yourself on a hot exhaust, locate the Trunnion at the end of the Belt Tension Rod, look to the front (nearside) close to the exhaust (see fig 24).

3.Remove the Spring Clip and washer holding the Trunnion in place on the Deck Tension Cradle (fig 25) and release the Trunnion so it can be turned.

4.Both the Trunnion and the Belt Tension Rod are threaded. You increase belt tension by winding the Trunnion towards the end of the Rod and reduce tension by winding in the reverse direction.

5.Having made the adjustment, re-locate and secure the Trunnion, re-tension the Belt with the Belt Tension Lever

– then re-check the Belt tension.

 

Access from here:

Fig 24

Deck Tension Cradle

Spring Clip

Deck Tension Rod

 

 

Washer

 

Trunnion

Fig 25

Deck Tension Cradle

 

Please Note: - WARNING

IMPORTANT

On NO account must the tractor be run with the Engine to Cutter Drive Belt over-tensioned as it will damage the Engine. As any such damage will not be covered by warranty, Countax strongly suggest you get your local supplying dealer to set Tensions.

Fig 26

Kg

2kg (4 - 5lbs)

 

cm 13mm (1/2")

 

Checking Tension

- P a g e 1 1 -

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Series Name of Dealer Address of Dealer Tel Fax Email Certificate of ConformityTraining Safety Instructions & Information C Series Garden TractorPreparation OperationMaintenance Series Garden Tractor Safety InstructionsLaying UP Your Tractor for the Winter Controls Dashboard C Series Garden Tractor Please Note Safety SwitchesPlease Read Before Attempting to Operate Your Tractor Pedal a Dashboard Indicators FigMoving OFF a Reversing aControls Levers C Series Garden Tractor Please Note Mulching Series Garden Tractor Cutter DecksMulch Mowing Fig Pulley ArrangementsCutter Deck Removal C Series Garden Tractor To Clean the Cutter DeckRemoval of Cutter Deck Fig De-tensioned Belt Tension LeverCutter Seems to Lose Power and the Belt Slips and Overheats Cutter Fails to Start or Cuts OUT When Switched onSeries Garden Tractor Cutter Deck Check List Please Note Before YOU StartDeck Levelling C Series Garden Tractor Adjustment HolesLevelling Front to Back , 19 TrunnionLevelling Side to Side Series Garden Tractor Deck LevellingPlease Note Warning Cutter Drive Belt C Series Garden TractorEngine to Cutter Drive Belt Tension Series Garden Tractor Powered Grass Collector Adjusting the Sweeping Height Fig Powered Grass Collector C Series Garden TractorPGC Drive Belt Assembly Tipping Cuttings FigStarting and Running Check List Series Garden Tractor Engine ChecklistInsert the KEY and Turn Clockwise Check oil levelPlease Note OIL Changing Engine Oil C Series Garden TractorOIL Draining Before DrainingFilling the Tank Fig Series Garden Tractor FuelFuel Filter AIR INTAKE/COOLING System Air & Cooling C Series Garden TractorSpark Plug Fig Battery FigHeadlights Fig Max charge rate 1.5 ampsStandard Tractor Fuses and PCB C Series Garden TractorHE Spec Tractors Printed Circuit Board Fuses FigTyres and Wheels Series Garden Tractor Wheels and TyresIf Your Tyres Spin or Lose Grip Check Tractor Wiring Diagram HE Wiring Diagram Console Switches Actuator Powered Tyre Sealant Useful Information/Tips & Tricks C Series Garden TractorSpring Clips Additional ToolsSpecification Summary

Garden Tractor specifications

The Countax Garden Tractor stands out as a versatile and powerful tool designed for homeowners and garden enthusiasts who demand precision and efficiency in their gardening tasks. These tractors are engineered to make lawn care easier while providing a robust platform for various gardening activities.

One of the main features of Countax Garden Tractors is their unique cutting system. The tractors come equipped with a rear-discharge cutting deck that optimizes grass collection and ensures the lawn is left looking immaculate. With cutting widths ranging typically from 38 to 50 inches, these models are suited for gardens of various sizes. The innovative design of the cutting blades facilitates a clean cut, delivering a tidy lawn with minimal effort.

In terms of power, Countax Garden Tractors boast reliable engines designed for performance and durability. Utilizing premium engines, often sourced from trusted manufacturers like Kawasaki or Kohler, these tractors provide the strength needed for tough terrains and prolonged use. The reliable engines are also designed for improved fuel efficiency, ensuring longer working times between refueling.

Equipped with a wide array of advanced technologies, Countax tractors feature the innovative ‘Multi-Functional Display’ that allows users to monitor their tractor's performance intuitively. Information such as speed, fuel level, and maintenance alerts can be viewed at a glance, enabling users to maintain optimal operating conditions.

Comfort is a key consideration in the design of Countax models. The ergonomic seat and adjustable steering wheel allow for a customized fit, ensuring that operators can work for extended periods without discomfort. Furthermore, improved suspension systems contribute to a smoother ride, minimizing vibrations on uneven terrain.

Countax also emphasizes usability by integrating features like hydrostatic transmission, which allows for seamless speed adjustments without changing gears. This allows users to make precise adjustments while mowing or navigating their garden.

Another noteworthy characteristic of Countax Garden Tractors is their adaptability. The tractors can be fitted with various attachments such as snow blades, trailers, and other implements, transforming them into all-season garden machines. This versatility ensures that users can handle a myriad of tasks beyond mowing, enhancing the overall value of the investment.

In summary, Countax Garden Tractors combine power, comfort, and advanced technology to deliver a mowing experience that meets the needs of both casual gardeners and avid lawn care enthusiasts. With a focus on performance and versatility, these tractors are designed to tackle challenges in any garden, ensuring years of reliable service and a pristine lawn.
Top Page Image Contents