Series Garden Tractor Wheels and Tyres

C Series Garden Tractor - Wheels and Tyres

TYRES AND WHEELS

Countax Tractors are fitted with grassland tyres that are designed to present a large area to the ground for grip and are of soft profile to prevent marking your turf. They are of thicker section and tougher than most 4 ply tyres. Persistent punctures and tyre deflation are nevertheless a problem experienced by around 5% of Countax customers. This is not a problem just for Countax owners – it is shared by the users of all types of off-road machinery fitted with pneumatic tyres. In practically every case there is a common cause – THORNS! Blackthorn, Hawthorn and Rose are usually at the bottom of the problem and will puncture any tyre not fitted with very expensive guards.

There are less expensive ways to overcome this problem - so check and avoid these possible causes:

1.The rim of the wheel has been damaged – breaking the seal on the tube-less tyre. There are two possible solutions:

•If the damage is not severe, treat with Countax Tyre Sealant (Pt No. 52903501).

•If the damage is significant – order a new wheel from your dealer.

2.If you have Hawthorn, Blackthorn or Wild Rose in your hedges - this will puncture any tyre. It makes sense to check any area you intend to cut or drive over and to remove any branches.

The long-term solution is to treat all four tyres with Countax Tyre Sealant – follow the instructions on the bottle.

IF YOUR TYRES SPIN OR LOSE GRIP CHECK:

1.Are the tyres correctly inflated? – check pressures on back page.

2.Are you going too fast for the conditions?

REMOVAL OF FRONT WHEEL - Fig 58

1.Apply Parking Brake.

2.Place chocks under all wheels that are to remain on the ground.

3.Remove the hubcap.

4.Use a 3/4" socket/spanner and ratchet to slacken off the wheel nut – do not remove!

5.Place a jack under the front axle (fig 58) and jack up until the wheel to be removed is well clear of the ground.

6.Remove the nut and washers and keep safely.

7.Pull off the wheel carefully – Taking care not to dislodge the Tractor from the jack.

When the tyre is repaired, replace the wheel preferably using a new 1/2" Nyloc nut (Part No. 04822400). Tighten to a torque setting of 5.25kg.m (38lb/ft).

REMOVAL OF REAR WHEEL - Fig 59 & 60

1.Apply Parking Brake.

2.Place chocks under the wheels that are to remain on the ground.

3.Place the jack under the jacking point on the chassis and raise until the wheel is well off the ground.

4.Remove the hubcap.

5.Using a flat ended screwdriver, lever off the ‘E’ clip and remove the washers (fig 60).

6.Pull off the wheel carefully taking care not to dislodge the tractor from the jack.

7.Remove the key from the wheel hub, first removing the grease seal from the front of the hub using a small screwdriver (keep safe with the key, ‘E’ clip and washers).

When the tyre is repaired, fit the wheel onto the shaft; line up keyways and tap in the key. Pull the wheel forward off the shaft until the grease seal recess is just clear and refit the seal. Then slide the wheel fully on the shaft. Reverse instructions 1-6 to complete the job.

Front Jacking Point

Fig 58

Rear Jacking Point

Fig 59

Wheel Removal

Key

E Clip

Grease Seal

Fig 60

- P a g e 2 0 -

Garden Tractor specifications

The Countax Garden Tractor stands out as a versatile and powerful tool designed for homeowners and garden enthusiasts who demand precision and efficiency in their gardening tasks. These tractors are engineered to make lawn care easier while providing a robust platform for various gardening activities.

One of the main features of Countax Garden Tractors is their unique cutting system. The tractors come equipped with a rear-discharge cutting deck that optimizes grass collection and ensures the lawn is left looking immaculate. With cutting widths ranging typically from 38 to 50 inches, these models are suited for gardens of various sizes. The innovative design of the cutting blades facilitates a clean cut, delivering a tidy lawn with minimal effort.

In terms of power, Countax Garden Tractors boast reliable engines designed for performance and durability. Utilizing premium engines, often sourced from trusted manufacturers like Kawasaki or Kohler, these tractors provide the strength needed for tough terrains and prolonged use. The reliable engines are also designed for improved fuel efficiency, ensuring longer working times between refueling.

Equipped with a wide array of advanced technologies, Countax tractors feature the innovative ‘Multi-Functional Display’ that allows users to monitor their tractor's performance intuitively. Information such as speed, fuel level, and maintenance alerts can be viewed at a glance, enabling users to maintain optimal operating conditions.

Comfort is a key consideration in the design of Countax models. The ergonomic seat and adjustable steering wheel allow for a customized fit, ensuring that operators can work for extended periods without discomfort. Furthermore, improved suspension systems contribute to a smoother ride, minimizing vibrations on uneven terrain.

Countax also emphasizes usability by integrating features like hydrostatic transmission, which allows for seamless speed adjustments without changing gears. This allows users to make precise adjustments while mowing or navigating their garden.

Another noteworthy characteristic of Countax Garden Tractors is their adaptability. The tractors can be fitted with various attachments such as snow blades, trailers, and other implements, transforming them into all-season garden machines. This versatility ensures that users can handle a myriad of tasks beyond mowing, enhancing the overall value of the investment.

In summary, Countax Garden Tractors combine power, comfort, and advanced technology to deliver a mowing experience that meets the needs of both casual gardeners and avid lawn care enthusiasts. With a focus on performance and versatility, these tractors are designed to tackle challenges in any garden, ensuring years of reliable service and a pristine lawn.