Exmark 00 & Higher, 850 manual Dimensions

Page 17

Specifications

Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with lanyard. Adjustable fore and aft.

Armrests: Standard–foam padded flip-up adjustable height armrests.

Seat Safety Switch: Incorporated into the Safety Interlock System.

Hydrostatic Ground Drive System

Hydrostatic Pumps: Two Hydro Gear ZT–3100 Integrated drive systems.

Hydraulic Oil Type: Exmark Premium Hydro oil.

Speeds:

0-8 mph (13 km/hr) forward.

0-5 mph (8 km/hr) reverse.

Drive wheel releases, located on left and right sides of engine deck, allow machine to be moved when the engine is not running and brake is off.

Tires & Wheels

 

Drive

Front

 

 

 

Caster

 

Pneumatic (Air-Filled)

Pneumatic

 

 

 

(Air-Filled)

Deck Size

44 & 48

52

All

Quantity

2

2

2

 

 

 

 

Tread

Turf Master

Turf Master

Smooth

 

 

 

 

Size

20x7.00-10

20x10.00-10

13x5.00–6

Ply Rating

4

4

 

Pressure

13 psi

13 psi

13 psi

 

(90 kPa)

(90 kPa)

(90 kPa)

Cutting Deck

Cutting Width:

44 inch Deck: 44 inches (112 cm)

48 inch Deck: 48 inches (122 cm)

52 inch Deck: 52 inches (132 cm)

Discharge: Side

Blade Size:

44 inch Deck: 22.25 inches (56.5 cm) – (2 ea.)

48 inch Deck: 16.25 inches (41.3 cm) – (3 ea.)

52 inch Deck: 18.00 inches (45.7 cm) – (3 ea.)

Blade Spindles: Solid steel spindles with no maintenance bearings.

Deck Drive: Electric clutch mounted on vertical engine shaft. Blades are driven by one belt (w/self-tensioning idler) direct from the engine.

Deck: Full floating deck is attached to out-front support frame. Maximum turf protection is provided with anti-scalp rollers.

Deck design allows for bagging, mulching or side discharge.

Deck Depth:

44 inch Deck: 5.0 inches (12.7 cm)

48 inch Deck: 5.0 inches (12.7 cm)

52 inch Deck: 5.0 inches (12.7 cm)

Cutting Height Adjustment: A foot deck lift lever is used to adjust the cutting height from 1 1/2 inch (3.8 cm) to 5 inches (12.7 cm) in 1/4 inch (6.4 mm) increments.

Mulching Kit: Optional.

Dimensions

Overall Width:

 

44 inch

48 inch

52 inch

 

Deck

Deck

Deck

Without

44.0 inches

44.0 inches

46.5 inches

Deck

(112 cm)

(112 cm)

(118 cm)

Deflector

48.5 inches

51.9 inches

56.0 inches

Up

(123 cm)

(132 cm)

(142 cm)

Deflector

56.7 inches

59.9 inches

64.6 inches

Down

(144 cm)

(152 cm)

(164 cm)

Overall Length:

44 inch Deck

48 inch Deck

52 inch Deck

78.7 inches

77.7 inches

77.7 inches

(200 cm)

(197 cm)

(197 cm)

Overall Height:

Roll Bar - Up

Roll Bar - Down

76.0 inches (193 cm)

45.5 inches (116 cm)

 

 

17

Image 17
Contents Quest SP Models California Introduction Contents Safety Alert Symbol SafetySafe Operating Practices PreparationSafety Operation Slope Operation Using the Rollover Protection System RopsTowing Maintenance and StorageChildren Safety Safety and Instructional Decals 103-3270 107-2102 109-3148 109-6014 109-9173 112-8651 PTO Switch Symbols 116-2834 Systems SpecificationsModel Numbers Dimensions Product Overview Curb WeightTorque Requirements Tread Width Center to Center of Tires, WidthwiseControls OperationFuel Shut-Off Valve Drive Wheel Release ValvesHour Meter Pre-Start PTO Engagement SwitchDeck Lift Pedal Transport LockRaise the Rollover Protection System Rops Operating InstructionsStarting the Engine Open the Fuel Shut-Off ValveEngaging the PTO Disengaging the PTODriving the Machine Adjusting the Cutting HeightTorque the 3/8 nyloc nut to 27-33 ft-lb 37-45 N-m Adjusting the Anti-Scalp RollersLoading a Unit TransportingTransporting a Unit Operation Recommended Maintenance Schedules MaintenanceCheck Engine Oil Level Check Battery ChargeRecommended Jump Starting Procedure Check Mower Blades Do Not jump start a weak battery if these conditions existService Dealer Check Safety Interlock SystemCheck Rollover Protection System Roll Bar Knobs Service Air CleanerCheck Seat Belt Check for Loose HardwareCheck Condition Of Belts Check Tire PressuresLubricate Grease Fittings Check Spark PlugsCheck Spark Arrester if equipped Copper-Based Anti-seize Thread Locking AdhesivesDielectric Grease Deck LevelingAdjusting the Blade Slope Deck Belt Tension Adjusting the Parking BrakePump Drive Belt Tension Adjusting the height Motion Control Handle AdjustmentElectric Clutch Adjustment Full Forward Tracking AdjustmentAdjusting the Seat Ride Suspension Feeler gauge Brake mounting bolt Shim Remove Engine Shrouds and Clean Cooling Fins Clean Engine and Exhaust System AreaClean Hydro Fan Cooling Fins Clean Debris From MachineMotor Oil Disposal Battery DisposalWaste Disposal Problem Possible Cause Corrective Action TroubleshootingPosition see Drive Wheel Release Electrical Diagram SchematicsSchematic Quest SP Turf Equipment Page Date Description of Work Done Service Done By Service RecordPage This page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 44 pages 57.61 Kb Manual 32 pages 16.59 Kb Manual 28 pages 32.2 Kb Manual 60 pages 29.4 Kb Manual 24 pages 21.56 Kb Manual 48 pages 5.05 Kb Manual 40 pages 46.04 Kb

00 & Higher, 850 specifications

The Exmark 850 is a top-of-the-line commercial mower, known for its durability, efficiency, and advanced features, making it a favorite among landscaping professionals. With a powerful engine and innovative technology, the Exmark 850 is designed to tackle tough mowing tasks while ensuring a high-quality cut.

One of the standout characteristics of the Exmark 850 is its robust engine performance. Powered by a reliable Kohler or Kawasaki engine, it delivers exceptional horsepower, enabling it to handle various terrains and grass types with ease. The engine is designed for fuel efficiency, allowing operators to work longer hours without frequent refueling, ultimately boosting productivity on the job.

The cutting deck of the Exmark 850 is engineered with precision, utilizing Exmark's proprietary UltraCut technology. This technology ensures that grass is cut evenly and efficiently, resulting in a clean, manicured appearance. The deck height is easily adjustable, allowing users to quickly change settings to accommodate different lawn conditions and preferences.

Another key feature is the innovative suspension system that enhances ride quality. The Exmark 850 is equipped with a heavy-duty front axle and high-performance suspension that absorbs bumps and uneven ground, allowing for a smoother mowing experience. This is especially beneficial for operators who spend long hours on the mower, reducing fatigue and improving comfort.

Ergonomics play a crucial role in the design of the Exmark 850. The operator station is thoughtfully crafted with optimal controls and comfortable seating, allowing for easy maneuverability and long-term use. The ergonomic handles and intuitive control layout make it easy for operators to navigate tricky landscapes, enhancing overall efficiency.

In terms of durability, the Exmark 850 is built to withstand the rigors of commercial use. The high-quality materials and construction ensure that this mower can handle challenging conditions, extending its lifespan and reducing maintenance needs. Additionally, Exmark offers an extensive warranty program, providing peace of mind for operators.

Safety features are also prioritized in the Exmark 850, with guards and shields designed to protect the operator while mowers are in use. These features also include emergency shut-off systems and blade brake systems, ensuring compliance with safety standards.

Overall, the Exmark 850 stands out as a high-performing, reliable, and efficient mower suitable for a variety of commercial landscaping tasks. With its powerful engine, advanced cutting technology, ergonomic design, and emphasis on durability and safety, it continues to be a top choice for professionals seeking high-quality lawn care equipment.