Exmark VH15KA483, VH15KA362 specs

4.1.15Remove engine shrouds and clean cooling fins: Service Interval: See Engine Owner's Manual

a)Stop engine and wait for all moving parts to stop. Engage parking brake. Remove key or spark plug wire(s).

b)Remove cooling shrouds from engine and clean cooling fins. Also clean dust, dirt and oil from external surfaces of engine which can cause improper cooling.

c)Make sure cooling shrouds are properly reinstalled. Operating the engine without cooling shrouds will cause engine damage due to overheating.

4.1.16Change fuel filter:

Service Interval: As Required

a)A fuel filter is installed in the fuel line between the fuel tank and the engine. Replace when necessary.

4.1.17Refer to Engine Operators Manual for detailed maintenance regarding the engine.

4.1.18Wheel hub - slotted nut torque specification.

When tightening the slotted nut on the wheel motor tapered shaft:

a)Torque the slotted nut to 100 ft. lbs. (136 N-m).

b)Further tighten the nut until the next set of slots line up with the cross hole in the shaft.

c)Replace cotter pin.

Note: Do not use anti-seize compound on the wheel hub.

4.1.19Thread locking adhesives such as “Loctite 242” or “Fel-Pro,Pro-LockNut-Type” are used on the following fasteners:

a)Pump sheave setscrews.

b)Square head setscrews on hydro pump control arms.

c)OPC lever setscrews.

d)Shoulder bolts in ends of speed control crank.

e)Sheave retaining bolt in end of engine crankshaft.

f)Fuel tank bulkhead fitting threads.

Adhesives such as “Loctite RC/609 or RC/680” or “Fel-Pro Pro-Lock Retaining I or Retaining II” are used on the following:

a) OPC lever hubs and cross-shaft

NOTE: Care must be used not to bond the bearing, next to each OPC hub, to the cross shaft which could cause binding of the OPC levers and erratic operation.

b)Fuel tank studs, where studs are inserted into tank.

4.1.20An anti-seize compound is used on the following locations:

a)Between the blade drive and pump drive sheaves and engine crankshaft.

4.1.21Mobil HTS grease (or food-grade antisieze) is used in the following locations:

a)Between the cutter housing spindle and bearings.

b)Between the cutter housing spindle and sheave.

c)Under top cutter housing bearing guard.

4.1.22Dielectric grease is used on all blade type electrical connections to prevent corrosion and loss of contact.

VH15KA362, VH15KA483 specifications

The Exmark VH15KA483 and VH15KA362 are innovative models in the realm of commercial turf care, designed specifically to cater to the rigorous demands of landscape professionals. Both models are equipped with a robust engine, advanced cutting technologies, and ergonomic features that enhance both performance and user comfort.

The VH15KA483 comes with a 48-inch cutting deck, ideal for maneuvering through various types of terrain with ease. It is powered by the reliable Kohler Command Pro engine, providing ample horsepower to tackle even the toughest mowing tasks. The engine's design ensures optimal fuel efficiency while minimizing noise, making it environmentally friendly and perfect for quiet work environments.

On the other hand, the VH15KA362 features a slightly smaller 36-inch deck, making it an excellent choice for residential properties and tight spaces where precision is key. Like its counterpart, it is also equipped with a powerful Kohler engine, ensuring that mowing efficiency and performance are never compromised.

One of the standout features of both models is the patented UltraCut cutting system, which delivers a superior quality of cut that is consistent and precise. The dual-belt drive system enhances cutting speed and efficiency, allowing operators to work through larger areas quickly without sacrificing quality. Both models also incorporate a deck lift system that allows for easy adjustments, accommodating varying grass heights effortlessly.

The ergonomics of Exmark's VH series are designed with user experience in mind. The comfortable, padded seat ensures that operators can tackle long mowing sessions without fatigue. The intuitive controls are easily accessible and user-friendly, promoting a seamless mowing experience. Additionally, the compact size of the VH15KA362 makes it especially appealing to landscape professionals who need to navigate through gates and tight spaces.

For durability, both models feature a heavy-duty steel frame and components that withstand the rigors of commercial use. The powder-coated finish not only enhances the aesthetic appeal but also protects against rust and corrosion, extending the lifespan of the mower.

In summary, the Exmark VH15KA483 and VH15KA362 are versatile, powerful, and efficient mowers tailored for commercial landscaping. With advanced cutting technology, user-friendly design, and robust durability, these models represent a solid investment for any professional lawn care operator seeking performance and reliability.