Exmark VH15KA483, VH15KA362 guide

4.1.4Check safety interlock system: Service Interval: Daily

a)For your safety, your Exmark mower is equipped with Operator Presence Controls (OPC). When either the PTO is engaged, or the speed control lever is not in neutral and both hands are removed from the handles, the mower engine MUST stop.

b)Check OPC circuits. Clear the area. Disengage the park brake. Run engine at one-third throttle, then with drive levers and neutral lock latches in neutral lock position, move the speed control lever out of neutral and release OPC levers - engine MUST stop.

Again, run engine at one-third throttle, move the speed control lever to neutral, engage PTO and release OPC levers - engine MUST stop.

Note: Park brake must be disengaged before the speed control lever is moved out of neutral or PTO is engaged or engine will kill.

c)If machine does not pass any of these tests, DO NOT operate. Contact your authorized EXMARK SERVICE DEALER.

IMPORTANT: It is essential that all Operator Safety Mechanisms be connected and in proper operating condition prior to the use of the mower.

4.1.5Check for loose hardware: Service Interval: Daily

a)Stop engine and wait for all moving parts to stop. Engage parking brake. Remove key or spark plug wire(s).

b)Visually inspect machine for any loose hardware or any other possible problem. Tighten hardware or correct the problem before operating.

4.1.6Service pre-cleaner element and air cleaner. Service Interval: See Engine Owner's Manual

a)Stop engine and wait for all moving parts to stop. Engage parking brake. Remove key or spark plug wire(s).

b)See engine owners manual for cleaning instructions.

4.1.7Change engine oil:

Service Interval: See Engine Owner's Manual

NOTE: Change oil after first five (5) hours of operation. Follow engine manufacturers recommendations for future oil changes.

a)Disengage PTO.

b)Stop engine and wait for all moving parts to stop. Engage parking brake. Remove key or spark plug wire(s).

c)Drain oil while engine is warm from operation.

d)The oil drain hose assembly is located on the left side of the engine.

Place pan under machine to catch oil. Remove oil drain plug. Allow oil to drain and replace oil drain plug. Torque plug to 20-24 ft-lbs.

e)Replace the oil filter as per Engine Owner's Manual. Clean around oil filter and unscrew filter to remove. Before reinstalling new filter, apply a thin coating of oil on the surface of the rubber seal. Turn filter clockwise until rubber seal contacts the filter adapter then tighten filter an additional 2/3 to 3/4 turn.

f)Clean around oil fill cap and remove cap. Fill to the specified capacity and replace cap. Use oil as specified in Engine Owners Manual. Do not overfill.

g)Start the engine and check for leaks. Stop engine and recheck oil levels.

VH15KA362, VH15KA483 specifications

The Exmark VH15KA483 and VH15KA362 are innovative models in the realm of commercial turf care, designed specifically to cater to the rigorous demands of landscape professionals. Both models are equipped with a robust engine, advanced cutting technologies, and ergonomic features that enhance both performance and user comfort.

The VH15KA483 comes with a 48-inch cutting deck, ideal for maneuvering through various types of terrain with ease. It is powered by the reliable Kohler Command Pro engine, providing ample horsepower to tackle even the toughest mowing tasks. The engine's design ensures optimal fuel efficiency while minimizing noise, making it environmentally friendly and perfect for quiet work environments.

On the other hand, the VH15KA362 features a slightly smaller 36-inch deck, making it an excellent choice for residential properties and tight spaces where precision is key. Like its counterpart, it is also equipped with a powerful Kohler engine, ensuring that mowing efficiency and performance are never compromised.

One of the standout features of both models is the patented UltraCut cutting system, which delivers a superior quality of cut that is consistent and precise. The dual-belt drive system enhances cutting speed and efficiency, allowing operators to work through larger areas quickly without sacrificing quality. Both models also incorporate a deck lift system that allows for easy adjustments, accommodating varying grass heights effortlessly.

The ergonomics of Exmark's VH series are designed with user experience in mind. The comfortable, padded seat ensures that operators can tackle long mowing sessions without fatigue. The intuitive controls are easily accessible and user-friendly, promoting a seamless mowing experience. Additionally, the compact size of the VH15KA362 makes it especially appealing to landscape professionals who need to navigate through gates and tight spaces.

For durability, both models feature a heavy-duty steel frame and components that withstand the rigors of commercial use. The powder-coated finish not only enhances the aesthetic appeal but also protects against rust and corrosion, extending the lifespan of the mower.

In summary, the Exmark VH15KA483 and VH15KA362 are versatile, powerful, and efficient mowers tailored for commercial landscaping. With advanced cutting technology, user-friendly design, and robust durability, these models represent a solid investment for any professional lawn care operator seeking performance and reliability.