Exmark VH15KA362, VH15KA483 manual Belt Guide Location

Page 33

Note: These drawings are viewed from underneath the engine deck

FIGURE 9

FIGURE 10

36" BELT GUIDE LOCATION

48" BELT GUIDE LOCATION

4.2.8Pump Drive Belt Tension Adjustment: No adjustment necessary.

4.2.9Hydro Drive Linkage Adjustment:

a)Adjust Speed Control Linkage and neutral safety switch

1.Stop engine and wait for all moving parts to stop.

2.Move the speed control lever (located on the console) to the full forward position and check the orientation of the tabs on the ends of the speed control crank (Figure 11). These tabs should be pointing straight down at the 6 o’clock position or slightly forward. Adjust the threaded yoke at the bottom of the speed control linkage (See Figure 11) until the tabs are positioned correctly.

3.Pull the speed control lever back to neutral. Check that the neutral safety switch actuating tab has depressed the plunger of the switch so that there is about 5/16” (.79 cm) between the tab and the switch. See Figure 11. If necessary, move the switch fore and aft.

(.79 cm)

FIGURE 11

b)Adjust Neutral Control Linkages

1.Raise the rear of the machine up onto jack stands high enough to raise the drive wheels off of the ground.

2.Start the engine and move the throttle ahead to the full throttle position. Place the neutral lock latches in the “forward” position as shown in Figure 2. Release the park brake and move the speed control lever to the “mid- speed” position.

Note: The OPC levers must be held down and the park brake must be disengaged whenever the speed control lever is moved out of neutral or the engine will kill.

28

Page 32 Page 34
Image 33
Page 32 Page 34
Contents For Serial Nos 670,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol Your Safety is InvolvedTraining PreparationCarbon monoxide can kill you Potential Hazard Operation Potential Hazard Page Maintenance and Storage Riding Attachments Safety SignsPage Specifications Operation Instructions DimensionsTorque Requirements ControlsApply parking brakes whenever leaving the operators position Operating Instructions PRE-STARTPotential Hazard Rotating blades under the mower deck are dangerous Transporting Periodic Maintenance Maintenance & Adjustments102-115 N-m Page Service Interval After First 250 hrs, then yearly thereafter Page Spray Lubricant Chart Grease Lubrication ChartPage Adjustments Cutting Height Adjustment 1 2.5 cm to 4 1/4 10.8 cm Page 32 .47 cm Belt Guide Location Page Page Waste Disposal Trouble ShootingMotor OIL Disposal Mower Tracks to Left or RightEngine Troubleshooting Blades do not Stop When DisengagedEngine Troubleshooting Table Engine will not StartMower Deck Belt Routing Wiring Diagram Hydraulic Diagram Year Limited Warranty Page Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Accessories

VH15KA362, VH15KA483 specifications

The Exmark VH15KA483 and VH15KA362 are innovative models in the realm of commercial turf care, designed specifically to cater to the rigorous demands of landscape professionals. Both models are equipped with a robust engine, advanced cutting technologies, and ergonomic features that enhance both performance and user comfort.

The VH15KA483 comes with a 48-inch cutting deck, ideal for maneuvering through various types of terrain with ease. It is powered by the reliable Kohler Command Pro engine, providing ample horsepower to tackle even the toughest mowing tasks. The engine's design ensures optimal fuel efficiency while minimizing noise, making it environmentally friendly and perfect for quiet work environments.

On the other hand, the VH15KA362 features a slightly smaller 36-inch deck, making it an excellent choice for residential properties and tight spaces where precision is key. Like its counterpart, it is also equipped with a powerful Kohler engine, ensuring that mowing efficiency and performance are never compromised.

One of the standout features of both models is the patented UltraCut cutting system, which delivers a superior quality of cut that is consistent and precise. The dual-belt drive system enhances cutting speed and efficiency, allowing operators to work through larger areas quickly without sacrificing quality. Both models also incorporate a deck lift system that allows for easy adjustments, accommodating varying grass heights effortlessly.

The ergonomics of Exmark's VH series are designed with user experience in mind. The comfortable, padded seat ensures that operators can tackle long mowing sessions without fatigue. The intuitive controls are easily accessible and user-friendly, promoting a seamless mowing experience. Additionally, the compact size of the VH15KA362 makes it especially appealing to landscape professionals who need to navigate through gates and tight spaces.

For durability, both models feature a heavy-duty steel frame and components that withstand the rigors of commercial use. The powder-coated finish not only enhances the aesthetic appeal but also protects against rust and corrosion, extending the lifespan of the mower.

In summary, the Exmark VH15KA483 and VH15KA362 are versatile, powerful, and efficient mowers tailored for commercial landscaping. With advanced cutting technology, user-friendly design, and robust durability, these models represent a solid investment for any professional lawn care operator seeking performance and reliability.
Top Page Image Contents