Exmark Ultra Vac manual Belts. Service Interval 50 Hours

Page 24

6.1.2Idler Bushings: Service Interval: 25 Hours. Lubricate with 1-2 pumps of SAE No. 2 multi-purpose grease.

6.1.3Bags: Service Interval: Daily. Inspect the bags for wear, tears, or damage.

WARNING

POTENTIAL HAZARD

Under normal use the bag will deteriorate and wear. Objects could exit a worn bag at high speeds.

WHAT CAN HAPPEN

Thrown objects can cause serious injury or kill you or bystanders.

HOW TO AVOID THE HAZARD

Check bag frequently for tears and holes. Replace worn bag.

6.1.4Belts. Service Interval: 50 Hours.

a)For LHP units only - Inspect the belt position on the idler arm.

The idler arm may become bent during use or transport. A bent idler arm could cause the belt to jump off of the idler and be damaged.

1) Make sure the belt cover is installed and run the blower for one to two minutes.

2) Shut off the deck drive, stop engine and wait for all moving parts to stop. Remove spark plug wire(s) or remove key. Remove the belt cover and check to make sure that the belt is riding near the center of the flat idler on the idler arm.

3) If the belt is not riding near the center of the idler, remove the blower, and bend the idler arm slightly.

4) Reinstall the blower and belt cover and repeat steps 1-3 until the belt is positioned near the center of the idler.

b)All Units - Inspect the belt for damage or wear. Replace belt with one of the following.

44” deck – PN 1-653332

60” deck – PN 103-0866

48” deck – PN 1-653333

72” deck – PN 103-0867

52” deck – PN 1-653438

 

6.1.5 Clean muffler and rear frame area:

Service Interval: Daily

WARNING

POTENTIAL HAZARD

Operating engine parts, especially the muffler, become extremely hot.

WHAT CAN HAPPEN

Severe burns can occur on contact.

Debris, such as leaves, grass, brush, etc. can catch fire.

HOW TO AVOID THE HAZARD

Allow engine parts, especially the muffler, to cool before touching.

Remove accumulated debris from muffler and engine area.

Install and maintain in working order a spark arrester before using equipment on forest-covered, grass-covered, brush- covered unimproved land.

24

Image 24
Contents Page Potential Hazard Exmark Parts PLUS Program Effective Date September 1 ProgramOperators Manual Table of Contents Safety Safety Alert SymbolTraining PreparationSafety Signs Specifications DimensionsModel Number Bagging SystemAssembly Instructions Lazer Z HP Assembly DiagramInstall Drive KIT Install Hood Assembly and BagsInstall Blower Assembly Assemble TubesBelt Routing Assembly Instructions Lazer Z & Lazer Z XP Lazer Z Assembly Diagram Lazer Z XP Assembly Diagram Install the Hood Assembly and Bags Lazer Z units only Lazer Z XP units skip to stepLazer Z XP units only Lazer Z units continue at step Belt Routing Inch units only 60 and 72 inch units skip to step72 inch units only 52 inch units continue at step Install the Weight Plates Assemble the TubesInstall the Removable Weights Operation RUN in 52 Units onlyPRE-START Mowing Bagger Removal for Side DischargeTransporting Maintenance Periodic MaintenanceBelts. Service Interval 50 Hours Parts Lists DecalsBlower Assembly Lazer Z HP 44, 48, 52 & Lazer Z Blower Assembly Lazer Z HP 44, 48, 52 & Lazer Z 52 Hood and BAG Assembly Lazer Z HP 44, 48, 52, & Lazer Z Hood and BAG Assembly Lazer Z HP 44, 48, 52, & Lazer Z 52 Blower Assembly Lazer Z 60 & 72 and Lazer Z XP 60 Blower Assembly Lazer Z 60 & 72 and Lazer Z XP 60 & 72 Hood and BAG Assembly Lazer Z 60 & 72 and Lazer Z XP 60 Hood and BAG Assembly Lazer Z 60 & 72 and Lazer Z XP 60 & 72 Completing KIT Assembly Lazer Z 52, 60, & 72 Lazer Z XP 60 Lazer Lazer XP Drive KIT Assembly Lazer Z HP 44,48 Warranty Limited Warranty Exmark Commercial Turf EquipmentPage Service Record See EXMARK’S Complete Line of Products for Turf Care

Ultra Vac specifications

The Exmark Ultra Vac is a powerful and efficient vacuum system designed to streamline lawn maintenance for both professionals and homeowners. This high-performance attachment is compatible with Exmark mowers, transforming them into versatile leaf collection and debris management tools that enhance productivity and maintain a clean landscape.

One of the main features of the Exmark Ultra Vac is its robust vacuuming capability. With a large capacity collection system, this vacuum can handle a significant volume of leaves, grass clippings, and other debris, reducing the frequency of emptying during operation. The unit is equipped with a heavy-duty impeller, which provides exceptional suction power, ensuring that even wet leaves and dense clippings are effectively collected without clogging.

The Ultra Vac system is designed for easy installation and removal, making it convenient for users to switch between mowing and vacuuming modes. It integrates seamlessly with various Exmark mowers, ensuring a perfect fit that does not compromise the mower's performance. This versatility is particularly valuable for lawn care professionals who require adaptability for different tasks and conditions.

Another notable technology in the Ultra Vac is its advanced airflow design. This feature optimizes the suction flow, allowing for efficient vacuuming while maintaining the overall performance of the mower. The aerodynamic design helps to reduce noise levels, providing a quieter operation which is particularly beneficial in residential areas or noise-sensitive environments.

The Ultra Vac also boasts user-friendly features such as an adjustable chute, allowing operators to customize the height and angle of the vacuuming path. This flexibility ensures that users can effectively collect debris in various terrains and conditions. Additionally, the unit's durable construction means it can withstand the rigors of regular use, offering reliability and longevity.

Maintenance is made easy with the Ultra Vac, thanks to accessible access points and a user-friendly design. Routine checks and cleaning can be performed without requiring extensive disassembly, making it practical for busy schedules.

In summary, the Exmark Ultra Vac is a powerful, efficient, and user-friendly vacuuming system that enhances the capabilities of Exmark mowers. Its robust features, advanced technologies, and durable design make it an essential tool for anyone looking to maintain a pristine landscape with minimal effort. Whether for professional use or residential upkeep, the Ultra Vac stands out as a reliable solution for effective debris management.