| ROTATE FORWARD FOR |
| PARK BRAKE POSITION |
| ROTATE BACK FOR |
| NEUTRAL LOCK POSITION |
PARK | LATCH IS IN |
BRAKE | THE DRIVE |
| POSTION |
FULL SPEED
FORWARD
NEUTRAL
LOCKNEUTRAL - HOLD IN THIS POSITION
FORWARD - RELEASE DRIVE LEVER
REVERSE - SQUEEZE DRIVE LEVER
FIGURE 3
DRIVE LEVER, NEUTRAL LOCK/PARK BRAKE OPERATION
For ECS Handles: To lock the drive levers in “neutral lock”, squeeze the drive levers to the “neutral” position. See Figure 4 (b). Place thumbs on the inner thumb lobe of the neutral lock /park brake latches and rotate them to the “neutral” position. See Figure 4 (c). Release the drive levers.
To lock the drive levers in “park brake”, squeeze the drive levers farther to the “brake” position. Place thumbs on the inner thumb lobe of the neutral lock/park brake latches and rotate them to the “park” position. See Figure 4 (d). Release drive levers.
CAUTION
POTENTIAL HAZARD
♦If the neutral lock/park brake latches are not completely engaged the drive levers could unexpectedly slip into the forward drive position.
WHAT CAN HAPPEN
♦If the drive levers slip into the drive position, the unit could lurch forward and cause injury or property damage.
HOW TO AVOID THE HAZARD
♦Be sure the drive levers are securely seated at the bottom of the “neutral” or “park” areas of the neutral lock latches.
To place the drive levers in the “drive” position, slightly squeeze the drive levers while placing thumbs on the outer thumb lobe of the neutral lock/park brake latches (or the index finger on the front lobe) and rotate them from under the drive levers. Slowly and carefully release the drive levers. See Figure 4 (a).
- 14 -