Exmark Lazer ZXS manual Carbon monoxide can kill you

Page 7

1.3.4Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks, wires, bones, and other foreign objects which may damage the equipment or cause personal injury to the operator or bystanders.

WARNING

POTENTIAL HAZARD

Engine exhaust contains carbon monoxide, which is an odorless deadly poison.

WHAT CAN HAPPEN

Carbon monoxide can kill you.

HOW TO AVOID THE HAZARD

Do not run engine indoors or in a small confined area where dangerous carbon monoxide fumes can collect.

DANGER

POTENTIAL HAZARD

In certain conditions gasoline is extremely flammable and highly explosive.

WHAT CAN HAPPEN

A fire or explosion from gasoline can burn you, others, and cause property damage.

HOW TO AVOID THE HAZARD

DO NOT smoke while refueling, and stay away from an open flame or where gasoline fumes may be ignited by spark.

Refuel only outdoors.

Store gasoline in an approved container and keep it out of the reach of children.

Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel when engine is running or when the engine is hot.

Never fill the fuel tank so that the gasoline level rises above a level that is 1/2” (1.3 cm) below the bottom of the filler neck to allow for gasoline expansion and prevent fuel spillage.

If fuel is spilled, DO NOT attempt to start the engine. Move away from the area of the spill and avoid creating any source of ignition until fuel vapors have dissipated.

Do not operate without entire exhaust system in place and in proper working condition.

- 2 -

Image 7
Contents For Serial Nos 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Training SafetySafety Alert Symbol Your Safety is InvolvedCarbon monoxide can kill you Operation Potential Hazard Page Safety Signs Maintenance and StorageRiding Attachments Location 32 & 36 Decks Under Page Specifications Controls DimensionsOperation Instructions Torque RequirementsPistol Grip Handle Neutral LOCK/PARK Brake Latch ECS Handle PRE-START Operating Instructions Drive LEVER, Neutral LOCK/PARK Brake Operation Drive LEVER, Neutral LOCK/PARK Brake Latch Operation Transporting Periodic Maintenance Maintenance and AdjustmentsBlade Bolt Installation Service Interval DailyPistol Grip Handles Drive Lever Hardware Location For Pistol Grip HandlesPistol Grip Handles Neutral Lock Lever Clearance ECS Handle Drive Lever SettingECS Handle Drive Lever Linkage Installation Service Interval 40 hrs Service Interval 160 hrsService Interval Refer to Chart Spray Lubricant Chart Lubrication ChartService Interval As Required Adjustments Caster Height Adjustment Cutting Height Adjustment 1 to 4 1/4 Mower Deck Belt Adjustment Blade Brake Adjustment Shifter Lever To Transmission Waste Disposal Trouble ShootingEngine will not Start Engine TroubleshootingBlades do not Stop When Disengaged Mower Cuts UnevenlyEngine Troubleshooting Table Wiring DiagramMower Deck Belt Routing For units purchased on or after October 1 Year Limited Warranty Exmark Turf EquipmentEvaporative Emission Control Warranty Statement Page Page Date Description of Work Done Service RecordFold Along Appropriate Line Check us out on the Web See EXMARK’S Complete Line of Accessories