Exmark Lazer ZXS manual Drive LEVER, Neutral LOCK/PARK Brake Latch Operation

Page 20

(a)(b)

(c)(d)

FIGURE 4

DRIVE LEVER, NEUTRAL LOCK/PARK BRAKE LATCH OPERATION

3.3.5Drive Wheel Engagement and Turning:

With drive levers in the “neutral” or “park brake” position, shift transmission into desired gear. Squeeze both drive levers and move both neutral lock/park brake latches from the “neutral” or “park brake” position to the “drive” position.

For straight ahead motion: Smoothly release both drive levers to engage drive wheels.

For turning: Squeeze the right hand drive lever to turn right and squeeze left hand drive lever to turn left (See Section 3.1.3).

3.3.6Stopping the Unit:

Squeeze drive levers all the way back to engage brakes. Move neutral lock/park brake latches into the “park brake” position and release drive levers. Shift transmission into neutral.

3.3.7PTO Engagement:

DANGER

POTENTIAL HAZARD

The rotating blades under the mower deck are dangerous.

WHAT CAN HAPPEN

Blade contact can cause serious injury or kill you.

HOW TO AVOID THE HAZARD

DO NOT put hands or feet under the mower or mower deck when the blades are engaged.

- 15 -

Image 20
Contents For Serial Nos 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Safety Alert SymbolYour Safety is Involved TrainingCarbon monoxide can kill you Operation Potential Hazard Page Riding Attachments Maintenance and StorageSafety Signs Location 32 & 36 Decks Under Page Specifications Dimensions Operation InstructionsTorque Requirements ControlsPistol Grip Handle Neutral LOCK/PARK Brake Latch ECS Handle PRE-START Operating Instructions Drive LEVER, Neutral LOCK/PARK Brake Operation Drive LEVER, Neutral LOCK/PARK Brake Latch Operation Transporting Maintenance and Adjustments Periodic MaintenanceService Interval Daily Blade Bolt InstallationFor Pistol Grip Handles Pistol Grip Handles Drive Lever Hardware LocationECS Handle Drive Lever Setting Pistol Grip Handles Neutral Lock Lever ClearanceECS Handle Drive Lever Linkage Installation Service Interval Refer to Chart Service Interval 160 hrsService Interval 40 hrs Service Interval As Required Lubrication ChartSpray Lubricant Chart Adjustments Caster Height Adjustment Cutting Height Adjustment 1 to 4 1/4 Mower Deck Belt Adjustment Blade Brake Adjustment Shifter Lever To Transmission Trouble Shooting Waste DisposalEngine Troubleshooting Blades do not Stop When DisengagedMower Cuts Unevenly Engine will not StartMower Deck Belt Routing Wiring DiagramEngine Troubleshooting Table Year Limited Warranty Exmark Turf Equipment For units purchased on or after October 1Evaporative Emission Control Warranty Statement Page Page Service Record Date Description of Work DoneFold Along Appropriate Line See EXMARK’S Complete Line of Accessories Check us out on the Web