Exmark Metro 21 Series manual Kawasaki Units Only

Page 20

Before attempting to operate the unit, refer to Section 1 (Safety) and follow all safety, operating, and preparation guidelines as stated in that section.

4.3.2Starting the Engine

1.Connect the wire to the spark plug (For Honda Units: See Figure 12, For

Kawasaki Units: See Figure 14).

Figure 14

(Kawasaki Units Only)

2.Open the fuel valve (Kawasaki Units: See Figure 4, Honda Units: See Figure 11).

3.Move the throttle-choke control to the (Choke) position. NOTE: Do not use the choke when the engine is warm.

4.For units without a Blade Brake Clutch: Hold the blade control bail to the handle.

5.Pull the starter handle lightly until you feel resistance, then pull it sharply. Allow the rope to return slowly.

6.When the engine starts, move the throttle control to the Fast position, and set the ground speed control as desired.

NOTE: If the engine fails to start after 3 pulls, repeat steps 3-6.

4.3.3Stopping the Engine:

For units without a Blade Brake Clutch: Release the blade control bail. Both the engine and the blade should stop within 3 seconds.

For units with a Blade Brake Clutch: Release the blade control bail. The blade should stop within 3 seconds. Move the throttle to the (Off) position to kill the engine.

NOTE: If the blade does not stop within 3 seconds after releasing the blade control bail, contact an Authorized Service Dealer.

4.3.4Using the Self-Propel Drive (Self-Propelled Units Only):

The lawn mower has three ground speeds. 1 is slow, 2 is medium, and 3 is fast (See Figure 10).

1.Start the engine.

2.Using the ground speed control, select the desired ground speed.

3.Squeeze the drive bail against the handle (See Figure 9).

NOTE: Do not shift speeds while squeezing the ground speed control against the handle. This can damage the transmission. Release the ground speed control before changing speeds.

NOTE: You can vary the ground speed by increasing or decreasing the distance between the ground speed control and the handle. Lower the control bar to decrease the ground speed when you are making a turn or if the lawn mower is moving too fast for you. If you lower the control bar too far the lawn mower stops self-propelling. Squeeze the ground speed control closer to the

-15 -

Page 19 Page 21
Image 20
Page 19 Page 21
Contents For Serial Nos 510,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Safety Alert SymbolTraining PreparationCarbon monoxide can kill you Operation Potential Hazard Maintenance and Storage Safety Signs Page Specifications Assembly InstructionsBag Support Rod Handle Latch Mounting Hole Location Fuel Tank Plastic Clips Bracket Self Tapping Screw Tank Base Oil Capacity Operation Instructions ControlsPRE-START Blade Control Lever Blade Brake Clutch Units OnlyOperating Instructions Honda Engines Only Kawasaki Engines OnlyKawasaki Units Only Page Cutting Heights Moving blade can cause serious injury Mowing with the Grass Bag Potential Hazard Maintenance Recommended Maintenance ScheduleWashing Method Scraping MethodPotential Hazard For Honda Units Wing Bolts Cover Paper Element Foam Element Base Worn or damaged blade can break Cutting Edge Radius BBC Shield Tabs and Nuts Tab and Bolt Grease Fitting Set the gap on the plug to 0.030 in .76 mm Lubricating the Gear Case Self-Propelled Units Only For Blade Brake Clutch Units Storage Potential Hazard Troubleshooting AccessoriesCorrective Action Year Limited Warranty Exmark Turf Equipment For units purchased on or after October 1Date Description of Work Done See EXMARK’S Complete Line of Accessories Check us out on the Web

Metro 21 Series specifications

The Exmark Metro 21 Series is a robust and versatile lawn mower designed to meet the needs of both professional landscapers and homeowners seeking a reliable cutting solution. Known for its durability, performance, and user-friendly design, the Metro 21 series has become a popular choice in the mowing industry.

One of the standout features of the Metro 21 Series is its compact and lightweight design, making it ideal for navigating through tight spaces and small yards. This mower is powered by a 21-inch cutting deck, which provides precise cutting and allows for excellent maneuverability. The cutting deck is crafted from high-quality materials, ensuring longevity and resistance to wear and tear over time.

Powered by Exmark's commercial-grade Kohler or Subaru engines, the Metro 21 offers powerful performance without sacrificing fuel efficiency. These engines are designed to deliver reliable starting and consistent power, making it easier to tackle tough mowing conditions. Additionally, the mower features Exmark’s patented rear-discharge system, which contributes to a clean cut and enhanced productivity by allowing clippings to be evenly distributed back onto the lawn.

The Metro 21 Series incorporates a user-friendly height adjustment system, allowing operators to quickly and easily adjust the cutting height to suit varying lawn conditions. This feature provides versatility for achieving the perfect cut in different grass types and growth lengths. Furthermore, the mower is equipped with comfortable handles that can be adjusted for various operator heights, ensuring ergonomic operation and reducing fatigue during extended use.

Another noteworthy technology in the Metro 21 Series is its folding handle design. This allows for easy storage and transport, making it an excellent choice for lawn care professionals who need to maneuver their equipment frequently. The model also comes with a durable composite grass bag for easy clipping collection, ensuring a tidy cleanup after mowing.

In summary, the Exmark Metro 21 Series is a well-engineered mower that combines power, efficiency, and convenience. Ideal for both commercial and residential use, its features cater to the needs of various users. Whether navigating small yards or tackling dense grass, the Metro 21 delivers superior performance, making it a worthwhile investment for lawn care enthusiasts and professionals alike.
Top Page Image Contents