Exmark Metro 21 Series manual Grease Fitting

Page 34

5.Open the fuel valve by turning the lever to the open position (Fig. 3).

6.Drain the gasoline completely from the tank and fuel line into an approved fuel container.

7.Remove the fuel tank from the mower.

8.Close the fuel valve.

9.Pour a small amount of fuel in the fuel tank, move the fuel around in the tank, and pour it out into an approved fuel container.

10.Install the fuel tank and fuel line.

5.10Lubricating the Pivot Arms

Service Interval: Lubricate after every 50 operating hours or when the season ends.

1.Move the rear wheel cutting height levers to the center setting.

2.Wipe the grease fittings with a clean rag (Fig. 31).

G0225

Grease Fitting

Figure 31

3.Install a grease gun onto the fitting and gently apply 2 or 3 pumps of #2 multi- purpose lithium base grease (Fig. 31).

NOTE: Excessive grease pressure may damage the seals.

5.11Adjusting the Self-Propel Drive (Self-Propelled Units Only):

If the lawn mower does not self-propel or has a tendency to creep forward when the control bar is released, adjust the wheel drive control knob on the rear of the gear box.

1.Close the door in the lawn mower housing and remove the grass bag.

2.If the lawn mower does not self propel, rotate the control knob clockwise 1/2 turn to tighten the belt.

If the lawn mower creeps forward, rotate the knob 1/2 turn counterclockwise to loosen the belt (Fig. 32).

G0224

 

Control Knob

 

 

 

Figure 32

5.12Servicing the Spark Plug:

Service Interval: Check the spark plug after every 100 operating hours.

1.Stop the engine and wait for all moving parts to stop.

2.Disconnect the wire from the spark plug (Fig. 12 & 14).

3.Clean around the spark plug.

4.Remove the spark plug from the cylinder head.

-29 -

Image 34
Contents For Serial Nos 510,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Training SafetySafety Alert Symbol PreparationCarbon monoxide can kill you Operation Potential Hazard Maintenance and Storage Safety Signs Page Specifications Assembly InstructionsBag Support Rod Handle Latch Mounting Hole Location Fuel Tank Plastic Clips Bracket Self Tapping Screw Tank Base Oil Capacity Operation Instructions ControlsPRE-START Blade Control Lever Blade Brake Clutch Units OnlyOperating Instructions Honda Engines Only Kawasaki Engines OnlyKawasaki Units Only Page Cutting Heights Moving blade can cause serious injury Mowing with the Grass Bag Potential Hazard Maintenance Recommended Maintenance ScheduleWashing Method Scraping MethodPotential Hazard For Honda Units Wing Bolts Cover Paper Element Foam Element Base Worn or damaged blade can break Cutting Edge Radius BBC Shield Tabs and Nuts Tab and Bolt Grease Fitting Set the gap on the plug to 0.030 in .76 mm Lubricating the Gear Case Self-Propelled Units Only For Blade Brake Clutch Units Storage Potential Hazard Troubleshooting AccessoriesCorrective Action Year Limited Warranty Exmark Turf Equipment For units purchased on or after October 1Date Description of Work Done See EXMARK’S Complete Line of Accessories Check us out on the Web

Metro 21 Series specifications

The Exmark Metro 21 Series is a robust and versatile lawn mower designed to meet the needs of both professional landscapers and homeowners seeking a reliable cutting solution. Known for its durability, performance, and user-friendly design, the Metro 21 series has become a popular choice in the mowing industry.

One of the standout features of the Metro 21 Series is its compact and lightweight design, making it ideal for navigating through tight spaces and small yards. This mower is powered by a 21-inch cutting deck, which provides precise cutting and allows for excellent maneuverability. The cutting deck is crafted from high-quality materials, ensuring longevity and resistance to wear and tear over time.

Powered by Exmark's commercial-grade Kohler or Subaru engines, the Metro 21 offers powerful performance without sacrificing fuel efficiency. These engines are designed to deliver reliable starting and consistent power, making it easier to tackle tough mowing conditions. Additionally, the mower features Exmark’s patented rear-discharge system, which contributes to a clean cut and enhanced productivity by allowing clippings to be evenly distributed back onto the lawn.

The Metro 21 Series incorporates a user-friendly height adjustment system, allowing operators to quickly and easily adjust the cutting height to suit varying lawn conditions. This feature provides versatility for achieving the perfect cut in different grass types and growth lengths. Furthermore, the mower is equipped with comfortable handles that can be adjusted for various operator heights, ensuring ergonomic operation and reducing fatigue during extended use.

Another noteworthy technology in the Metro 21 Series is its folding handle design. This allows for easy storage and transport, making it an excellent choice for lawn care professionals who need to maneuver their equipment frequently. The model also comes with a durable composite grass bag for easy clipping collection, ensuring a tidy cleanup after mowing.

In summary, the Exmark Metro 21 Series is a well-engineered mower that combines power, efficiency, and convenience. Ideal for both commercial and residential use, its features cater to the needs of various users. Whether navigating small yards or tackling dense grass, the Metro 21 delivers superior performance, making it a worthwhile investment for lawn care enthusiasts and professionals alike.