Exmark Metro 21 Series manual Cutting Heights

Page 22

10.Release the blade control bail. You should hear a “bang.” The blade should stop in three seconds.

11.Immediately push the lawn mower over the newspaper ball.

12.Stop the engine and wait for all moving parts to stop.

13.Walk around the lawn mower to check for the newspaper ball. If the ball did not go under the deck, repeat step 7 through 12.

14.Pull the lawn mower away from the newspaper. If the newspaper ball unravels or is shredded, the blade has not properly stopped, resulting in an unsafe operating condition. Contact an Authorized Service Dealer.

DANGER

POTENTIAL HAZARD

♦If the blade brake clutch system is inoperative, the blade will continue to rotate when you release the blade control bail.

WHAT CAN HAPPEN

♦Contact with the blade could occur, causing serious injury.

HOW TO AVOID THE HAZARD

♦Check the BBC operation before each use.

♦Never use the BBC-equipped lawn mower with an inoperative safety system.

♦Take your lawn mower to an Authorized Service Dealer for repair if the safety system fails to operate properly.

Test Using the Grass Bag:

1.Install the empty grass bag on the discharge tunnel.

2.Start the engine.

3.Squeeze the blade control bail against the handle.

4.Move the blade control lever to the full forward Latch position. The bag should begin to inflate, indicating that the blade is engaged and rotating.

5.Release the blade control bail. If the bag does not immediately deflate, it indicates that the blade is still rotating. The blade brake clutch mechanism may deteriorating, and, if ignored could result in an unsafe operating condition. Have the lawn mower inspected and serviced by an Authorized Service Dealer.

4.3.8Adjusting the Cutting Height

Each wheel is adjusted individually with a wheel height adjustment lever. The cutting heights are listed in the following table.

Cutting Heights

0.75 in (19 mm)

2.25 in (57 mm)

1.25 in (32 mm)

2.75 in (70 mm)

1.75 in (44 mm)

3.25 in (83 mm)

- 17 -

Page 21 Page 23
Image 22
Page 21 Page 23
Contents For Serial Nos 510,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Training SafetySafety Alert Symbol PreparationCarbon monoxide can kill you Operation Potential Hazard Maintenance and Storage Safety Signs Page Specifications Assembly InstructionsBag Support Rod Handle Latch Mounting Hole Location Fuel Tank Plastic Clips Bracket Self Tapping Screw Tank Base Oil Capacity Operation Instructions ControlsPRE-START Blade Control Lever Blade Brake Clutch Units OnlyOperating Instructions Honda Engines Only Kawasaki Engines OnlyKawasaki Units Only Page Cutting Heights Moving blade can cause serious injury Mowing with the Grass Bag Potential Hazard Maintenance Recommended Maintenance ScheduleWashing Method Scraping MethodPotential Hazard For Honda Units Wing Bolts Cover Paper Element Foam Element Base Worn or damaged blade can break Cutting Edge Radius BBC Shield Tabs and Nuts Tab and Bolt Grease Fitting Set the gap on the plug to 0.030 in .76 mm Lubricating the Gear Case Self-Propelled Units Only For Blade Brake Clutch Units Storage Potential Hazard Troubleshooting AccessoriesCorrective Action Year Limited Warranty Exmark Turf Equipment For units purchased on or after October 1Date Description of Work Done See EXMARK’S Complete Line of Accessories Check us out on the Web

Metro 21 Series specifications

The Exmark Metro 21 Series is a robust and versatile lawn mower designed to meet the needs of both professional landscapers and homeowners seeking a reliable cutting solution. Known for its durability, performance, and user-friendly design, the Metro 21 series has become a popular choice in the mowing industry.

One of the standout features of the Metro 21 Series is its compact and lightweight design, making it ideal for navigating through tight spaces and small yards. This mower is powered by a 21-inch cutting deck, which provides precise cutting and allows for excellent maneuverability. The cutting deck is crafted from high-quality materials, ensuring longevity and resistance to wear and tear over time.

Powered by Exmark's commercial-grade Kohler or Subaru engines, the Metro 21 offers powerful performance without sacrificing fuel efficiency. These engines are designed to deliver reliable starting and consistent power, making it easier to tackle tough mowing conditions. Additionally, the mower features Exmark’s patented rear-discharge system, which contributes to a clean cut and enhanced productivity by allowing clippings to be evenly distributed back onto the lawn.

The Metro 21 Series incorporates a user-friendly height adjustment system, allowing operators to quickly and easily adjust the cutting height to suit varying lawn conditions. This feature provides versatility for achieving the perfect cut in different grass types and growth lengths. Furthermore, the mower is equipped with comfortable handles that can be adjusted for various operator heights, ensuring ergonomic operation and reducing fatigue during extended use.

Another noteworthy technology in the Metro 21 Series is its folding handle design. This allows for easy storage and transport, making it an excellent choice for lawn care professionals who need to maneuver their equipment frequently. The model also comes with a durable composite grass bag for easy clipping collection, ensuring a tidy cleanup after mowing.

In summary, the Exmark Metro 21 Series is a well-engineered mower that combines power, efficiency, and convenience. Ideal for both commercial and residential use, its features cater to the needs of various users. Whether navigating small yards or tackling dense grass, the Metro 21 delivers superior performance, making it a worthwhile investment for lawn care enthusiasts and professionals alike.
Top Page Image Contents