Exmark MPKA21 manual Pre-Start, Fuel Shut-Off Valve

Page 15

Operation

Figure 5

1.Ground speed control

Fuel Shut-Off Valve

For MPKA21, MSKA21, and MSKA21B Units: The fuel shut off valve is installed on the fuel line midway between the fuel tank and the engine as shown in Figure 6.

Figure 6

MPKA21, MSKA21, and MSKA21B Units

1. Fuel line

3. Elbow fitting

2.Fuel valve

For MSHN21 and MSHN21B Units: The fuel shut off valve is located on the engine as shown in Figure 7.

Figure 7

MSHN21 and MSHN21B Units

1. Fuel valve

For MPKA21CA, MSKA21CA, and MSKA21BCA Units:Do not have a fuel shut off valve.

The fuel shut off valve shuts off the flow of fuel when the machine will not be used for a few days, when parking inside a building, and during transport to and from the job. Rotate the valve 1/4 turn clockwise to shut off fuel. Rotate the valve 1/4 turn counterclockwise to turn on fuel.

Pre-Start

Fill fuel tank. For best results use only clean, fresh regular grade unleaded gasoline with an octane rating of 87 or higher. To ensure freshness, purchase only the quantity of gasoline that you expect to use in

30 days. Using unleaded gasoline results in fewer combustion deposits and longer engine life. See Engine Owner’s Manual.

Do Not add oil to gasoline.

Do Not use methanol, gasoline containing methanol, gasohol containing more the 10% ethanol, premium gasoline or white gas. Using these fuels can damage the engine’s fuel system.

Do Not use gasoline that has been stored since the last mowing season or longer.

Do Not overfill fuel tank. Never fill the fuel tank so that the fuel level rises above a level that is 1/2 inch below the bottom of the filler neck to allow for fuel expansion and prevent fuel spillage.

15

Image 15
Contents Metro California Introduction Contents Training SafetySafety Alert Symbol Safe Operating PracticesSafety Operation Slope Operation Maintenance and StorageSafety and Instructional Decals 77-0500 109-8190 Systems SpecificationsDimensions Model NumbersOverall Length and Height at 4 inch Cutting Height Product OverviewControls OperationFuel Shut-Off Valve Pre-StartStarting the Engine Handle AdjustmentOperating Instructions Open the Fuel Shut-Off ValveAll Kawasaki Units Stopping the EngineUsing the Discharge Tunnel Using the Self-Propel Drive Self-Propelled Units OnlyAdjusting the Cutting Height Test Using the Grass BagUsing the Grass Bag Operating Tips Cutting Leaves Recommended Maintenance Schedules MaintenanceCheck the Mower Blade Check Engine Oil LevelTip the lawn mower onto its right side see and Figure Check for Loose Hardware Service Air Filter Kawasaki UnitsService Air Filter Honda Units Changing the Oil Filter Kawasaki Units Only Change Engine OilServicing the Wheels Check Condition Of Belt Self-Propelled Units OnlyLubricate the Pivot Arms Check Spark Plugs Lubricate the Gear Case Self-Propelled Units OnlyAdjusting the Blade Brake Cable Adjusting the Self-Propel Drive Self-Propelled Units OnlyCleaning the Discharge Tunnel and Plug Clean Grass Build-Up Under DeckCleaning the Blade Brake Clutch Shield Cleaning Under Belt Cover Self-Propelled Models OnlyMotor Oil Disposal Waste DisposalGeneral Storage Information StoragePreparing the Fuel System Preparing the EngineProblem Possible Cause Corrective Action TroubleshootingTroubleshooting Exmark Commercial Turf Equipment Service Record See EXMARK’S Complete Line of Accessories and Options