Exmark TT23KAEP manual Recommended Maintenance Schedules

Page 21

Maintenance

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

WARNING

While maintenance or adjustments are being made, someone could start the engine. Accidental starting of the engine could seriously injure you or other bystanders.

Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

WARNING

The engine can become very hot. Touching a hot engine can cause severe burns.

Allow the engine to cool completely before service or making repairs around the engine area.

Recommended Maintenance Schedule(s)

Maintenance Service

Maintenance Procedure

Interval

 

 

 

 

 

After the first 5 hours

Change the engine oil.

 

 

 

After the first 100 hours

Check the wheel hub slotted nut torque specifications.

 

 

 

After the first 250 hours

Change the hydraulic filter.

 

 

 

• Check the engine oil level.

 

Check the mower blades.

Before each use or daily

Check the safety interlock system.

 

• Check for loose hardware.

 

• Clean the grass build-up from under the deck.

 

 

 

• Check the hydraulic oil level.

Every 40 hours

• Check the tire pressures.

• Check the condition of the belts.

 

 

• Grease the hydro control arm support bushings.

 

 

Every 50 hours

• Service the air cleaner. (May need more often under severe conditions. See the Engine

 

manual for additional information.)

 

 

 

 

 

Every 80 hours

Remove engine shrouds and clean cooling fins.

 

 

 

Every 100 hours

Change the engine oil. (May need more often under severe conditions.)

 

 

 

Every 160 hours

Check the spark plugs.

 

 

 

Every 500 hours

Change the hydraulic filter (Every 250 hours/yearly if using Mobil 1 15W50)

 

 

Every 600 hours

• Replace the air cleaner elements. (May need more often under severe conditions. See the

 

Engine manual for additional information.)

 

 

 

 

 

21

Image 21
Contents Turf Tracer California Introduction Contents Safety Alert Symbol SafetySafe Operating Practices TrainingSafety Slope Operation OperationMaintenance and Storage Safety Safety and Instructional Decals 103-2432 103-4935 116-0404 Specifications Model NumbersSystems Dimensions Torque Requirements Product OverviewControls OperationPre-Start Operating Instructions Driving the Machine Adjusting the Cutting HeightAdjusting the Anti-Scalp Rollers Transporting a Unit TransportingRecommended Maintenance Schedules MaintenanceCheck Engine Oil Level Check Battery ChargeCheck Mower Blades Check Safety Interlock SystemCheck for Loose Hardware Service Air CleanerChange Engine Oil Check Hydraulic Oil LevelCheck Tire Pressures Check Condition Of BeltsLubricate Grease Fittings Lubricate Caster Wheel Hubs Remove Engine Shrouds and Clean Cooling FinsCheck Spark Plugs Change Fuel FilterHydraulic System Air Purge Change Hydraulic System FilterWheel Hub Slotted Nut Torque Specification Fuel Tank Mounting Hardware SpecificationsThread Locking Adhesives Speed Control Linkage Neutral Safety Switch Adjustment Brake AdjustmentMobil HTS Grease Or Food-Grade Anti-seize Copper-Based Anti-seizeHydro Control Linkage Adjustment Neutral Control Linkages AdjustmentTracking Adjustment Drive Lever Linkage AdjustmentElectric Clutch Adjustment Hydro Pump Spring Tension SettingClean Grass Build-Up Under Deck Waste DisposalBattery Disposal Problem Possible Cause Corrective Action TroubleshootingTroubleshooting Electrical Diagram SchematicsHydraulic Diagram Exmark Commercial Turf Equipment Page Page Service Record Page Page See EXMARK’S Complete Line of Accessories and Options