Ferris Industries 1000ZKAV21/48, 1000ZKAV23/61 manual Safety Decals, General, Decal Warning/Danger

Page 9

Safety Decals

GENERAL

This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effec- tively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

WARNING

 

DANGER

AVOID SERIOUS INJURY OR DEATH

 

AVOID SERIOUS INJURY OR DEATH

READ OPERATOR'S MANUAL.

 

THROWN OBJECTS AND BLADE CONTACT CAN CAUSE SERIOUS INJURY OR DEATH.

DO NOT ALLOW OPERATION OF MACHINERY BY UNTRAINED

 

BE SURE BLADES AND ENGINE ARE STOPPED BEFORE PLACING HANDS OR FEET NEAR BLADES.

PERSONNEL.

 

DISENGAGE PTO, ENGAGE PARKING BRAKE, SHUT OFF ENGINE AND REMOVE KEY BEFORE MAKING ADJUSTMENTS,

KEEP SAFETY DEVICES (GUARDS, SHIELDS, & SWITCHES) IN

 

SERVICING, CLEANING OR LEAVING THE MACHINE.

All DANGER, WARNING, CAUTION and instructional messages on your rider and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your rider and mower.

If any of these decals are lost or damaged, replace them at once. See your local dealer for replacements.

These labels are easily applied and will act as a con- stant visual reminder to you, and others who may use the equipment, to follow the safety instructions neces- sary for safe, effective operation.

OPERATION

To Start Engine:

To Operate PTO Clutch:

Seat must be occupied, PTO

Operator must be in seat.

Switch OFF, Parking Brake ON

Pull up to Engage.

and both control handles are

Push down to Disengage.

locked in Neutral.

 

PLACE AND WORKING.

OPERATING ON SLOPES CAN BE DANGEROUS

AVOID CARBON MONOXIDE POISONING

DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.

WHEN LEAVING MACHINE, SHUT OFF ENGINE, REMOVE KEY AND

IF YOU CANNOT BACK UP A HILL, DO NOT OPERATE ON IT.

DO NOT OPERATE THE ENGINE IN UNVENTILATED AREA.

SET PARKING BRAKE.

AVOID SUDDEN TURNS.

 

 

DO NOT MOW SLOPES IF GRASS IS WET.

 

 

IF MACHINE LOSES TRACTION ON A SLOPE, STOP THE

 

 

BLADES AND PROCEED SLOWLY DOWN THE SLOPE.

 

47171

Decal - Warning/Danger

Part No. 47171

To Stop Engine:

Engage Parking Brake, Throttle at half to full, turn Ignition Switch Off.

Before Leaving Machine:

Turn PTO switch off, shut off engine, remove key, and set Parking Brake

GROUND SPEED AND

STEERING LEVERS

Right lever controls speed and direction of right drive wheel. Notch is neutral

lock.

Left lever controls speed and direction of left drive wheel. Notch is neutral lock.

Steer by slowing the lever in the direction of the turn.

PARKING BRAKE

LEVER

Pull to set Parking Brake.

Push to release Parking

Brake.

DECK LIFT PEDAL

Push to raise deck.

CUTTING HEIGHT

ADJUSTMENT PIN

When Operator Leaves Seat:

Engine will shut off if PTO is on.

Engine will shut off of Parking Brake is off.

Engine will shut off if both control levers are not locked in neutral.

DO NOT TOW!

Damage may result to Hydrostatic Transmission.

Decal - Danger

Decal - Danger

Part No. 1704276

Part No. 1704277

Decal - Operation & Controls

Part No. 45559

DANGER

ROTATING PARTS UNDER ENGINE.

KEEP HANDS AND FEET CLEAR.

STOP ENGINE BEFORE SERVICING.

Decal - Danger

Decal - Caution

Part No. 22143

Part No. 46481

00

7

Image 9
Contents Ferris Industries ManualFerris Limited Warranty Table of Contents Identification Numbers North American Models CE ModelsTractor Identification tag Preparation TrainingOperation Safety Rules & InformationSlope Operation Do NotMaintenance and Storage ChildrenEmissions Spring should be removed by an authorized dealer only General Safety DecalsDecal Warning/Danger Decal Danger Decal Operation & ControlsIgnition Switch Seat Adjustment LeverControl Functions Ground Speed Control LeversSafety Interlock System Features & ControlsChecks Before Starting General Operating SafetyStarting the Engine Operating the Zero Turn RiderStopping the Rider MowingSmooth Travel Zero Turn Driving PracticeForward Travel Practice Reverse Travel PracticePractice Turning In Place Practice Turning Around a CornerExecuting an End-Of-Row Zero Turn ExecutingStarting After Long Term Storage StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 DaysPage See Before Every Spring Check Tire PressuresFall Tire PressureRegular Maintenance Checking / Adding FuelFuel Filter Lubrication GreaseOil RE-PACK Bearings Anually Checking the Battery Fluid Battery MaintenanceCleaning the Battery and Cables Battery CompartmentRemoving the Blade Servicing the Mower BladesTroubleshooting the Rider Troubleshooting Adjustments & ServiceTroubleshooting the Mower Troubleshooting, Adjustment & ServiceSeat Adjustment Troubleshooting, Adjustment & ServiceGround Speed Control Lever Adjustment Speed Balancing AdjustmentParking Brake Adjustment Parking Brake AdjustmentBlade Brake Check PTO Clutch AdjustmentNeutral Position and Return Spring Adjustment Neutral AdjustmentNeutral Position Adjustment Return Spring AdjustmentDeck Leveling Adjustment Cutting Height AdjustmentMower Belt Replacement Hydraulic Pump Drive Belt ReplacementChecking Battery Voltage Battery ServiceCharging a Completely Discharged Battery Jump Starting With Auxiliary Booster BatteryEngine Block Troubleshooting, Adjustment & ServiceHOW and When to WATER, Fertilize & Aerate General InformationTypes of GRASS, Climate and Conditions Inch Tall Grass Requires Incremental CuttingProper Cutting Height Cut Here On First Pass SecondWhen and HOW Often to MOW Lawn Care & Mowing InformationWhat Mowing Patterns to USE Mowing Methods Proper Broadcast MowingProper Mulching Composting How to start a healthy compost pileTips On Dealing With Clippings Methods actually contribute to a healthy lawnStreaking Solutions for Common Mowing ProblemsStepped Cutting Stepped CuttingUneven Cutting ScalpingStingers Technical Manuals Common International SymbolsLC-9