Hayter Mowers RZT420H manual Operation, Think Safety First, Recommended Fuel

Page 16

Operation

Note: Determine the left and right sides of the machine from the normal operating position.

Think Safety First

Please carefully read all of the safety instructions and decals in the safety section. Knowing this information could help you, your family, pets or bystanders avoid injury.

Mowing on wet grass or steep slopes can cause sliding and loss of control.

Wheels dropping over edges can cause rollovers, which may result in serious injury, death or drowning.

A loss of traction is a loss of steering control.

To avoid loss of control and possibility of rollover:

•Do not mow near drop-offs or near water.

•Do not mow slopes greater than 15 degrees.

•Reduce speed and use extreme caution on slopes.

•When mowing slopes, gradually work from lower to higher areas on the incline.

•Avoid sudden turns or rapid speed changes.

•Turn up, into an incline when changing directions on slopes. Turning down the slope reduces traction.

•Attachments change the handling characteristics of the machine. Use extra caution when using attachments with the machine.

Figure 12

1.Safe Zone-use the machine here

2.Use walk behind mower and/or hand trimmer near drop-offs and water.

3.Water

Recommended Fuel

Use unleaded regular petrol suitable for automotive use (87 pump octane minimum).

In certain conditions, petrol is extremely flammable and highly explosive. A fire or explosion from petrol can burn you and others and can damage property.

•Fill the fuel tank outdoors, in an open area, when the engine is cold. Wipe up any petrol that spills.

•Never fill the fuel tank inside an enclosed space.

•Do not fill the fuel tank completely full. Add petrol to the fuel tank until the body of the tank is full. Always leave the neck empty in the fuel tank to allow the petrol to expand.

•Never smoke when handling petrol, and stay away from an open flame or where petrol fumes may be ignited by a spark.

•Store petrol in an approved container and keep it out of the reach of children. Never buy more than a 30-day supply of petrol.

•Do not operate without entire exhaust system in place and in proper working condition.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents RZT420H Ride-On With Recycling/Side Discharge DeckContents IntroductionSafe Operating Practices SafetyTraining Preparation OperationTurn Riding Mower Safety Sound PowerSound Pressure VibrationSlope Chart Safety and Instructional Decals 93-7009 106-8717110-6824 Battery Symbols Setup Setting Up the Motion Control LeversNo Parts Required Procedure Loose PartsPage Connecting the Battery Installing the Seat CableParts needed for this procedure Completing the Setup Checking the Tyre PressureProduct Overview Controls Operation Think Safety FirstRecommended Fuel Using Stabilizer/Conditioner Filling the Fuel TankChecking the Engine Oil Level Starting the EngineSafety Interlock System Operating the BladesStopping the Engine Engaging the BladesTesting the Safety Interlock System Driving Forward or BackwardStopping the Machine ForwardAdjusting the Height of Cut Adjusting the Motion Control LeversAdjusting the Height Positioning the SeatAdjusting the Tilt Pushing the Machine by HandSide Discharge To Push the MachineInstalling the Discharge Cover for Mulching Removing and Installing the Discharge CoverRemoving the Discharge Cover for Side Discharge Operating Tips Maintenance Recommended Maintenance SchedulesPremaintenance Procedures Accessing the EngineAccessing the Battery Raising the SeatLubrication Greasing the BearingsServicing the Air Cleaner Engine MaintenanceServicing Paper Element Checking the Oil Level Servicing the Engine OilChanging the Oil and the Filter Oil drain hose Cleaning the Blower Housing Installing the Spark PlugServicing the Spark Plug Removing the Spark PlugFuel System Maintenance Replacing the Fuel FilterCharging the Battery Electrical System MaintenanceRemoving the Battery Installing the Battery Charging the BatteryServicing the Fuses Drive System Maintenance Checking the Tyre PressureCutter Deck Maintenance Servicing the Cutting BladesBefore Inspecting or Servicing the Blades Inspecting the BladesInstalling the Blades Leveling the Cutter Deck from Side-to-SideRemoving the Blades Sharpening the BladesAdjusting the Front-to-Rear Blade Slope Removing the Cutter Deck Cutter Deck Belt Maintenance Installing the Cutter DeckInspecting the Belts Replacing the Cutter Deck BeltReplacing the Grass Deflector Cleaning Washing the Underside of the Cutter DeckCleaning and Storage StorageTroubleshooting Problem Possible Cause Corrective ActionProblem Possible Cause Corrective Action Schematics Page Page 1st Year 12 months Page Limited Warranty Date of Sale Your Local Dealer

RZT420H specifications

The Hayter Mowers RZT420H is a cutting-edge lawn mower designed for those who demand efficiency and superior performance while maintaining their gardens. This machine combines innovative technology with user-friendly features to deliver a top-notch mowing experience.

One of the standout features of the RZT420H is its robust 42-inch cutting deck, ideally suited for medium to large lawns. This size allows for swift mowing while ensuring a clean and even cut. The cutting deck is made from high-quality materials, providing durability and resistance against wear and tear. Additionally, the deck’s design is optimized for excellent airflow, enhancing the cutting and mulching performance.

Powering the RZT420H is a reliable 20 HP Kohler engine. This engine provides ample power to handle tough grass conditions, ensuring that you can mow through dense areas without bogging down. The hydrostatic transmission allows for smooth, effortless speed changes, giving users precise control over their mowing speed. Whether navigating tight corners or tackling open fields, the hydrostatic system ensures a seamless mowing experience.

A significant advancement in the RZT420H is its zero-turn capability. This feature enables the mower to pivot around obstacles with ease, reducing the time spent trimming and maneuvering. This agility is complemented by a comfortable operator station, which includes an adjustable seat and user-friendly controls, ensuring that mowing is a pleasurable activity rather than a chore.

The RZT420H is also equipped with a range of convenience features. The easy-to-access maintenance points simplify routine care, making it easier to keep the mower in optimal working condition. Additionally, the mulching kit allows for effective grass recycling, returning nutrients to the lawn while minimizing yard waste.

Furthermore, the RZT420H boasts a compact design, which is particularly advantageous for storage and transport. Its exceptional build quality, combined with cutting-edge technology and thoughtful design details, makes the Hayter Mowers RZT420H a remarkable choice for homeowners seeking a reliable and efficient lawn maintenance solution. In conclusion, this mower brings together power, precision, and convenience, making it a worthy investment for any lawn care enthusiast.
Top Page Image Contents