Hayter Mowers 401C001001 manual Storage, Trimmer, Engine

Page 19

MAINTENANCE

STORAGE

WARNING: Do not remove petrol while inside a building, near a fire, or while you smoke. Petrol fumes can cause an explosion or a fire.

When the machine is put in storage for thirty days or more, follow the steps below to make sure the machine is in good condition the following season.

Trimmer

SCompletely clean the machine.

SPut the machine in a building that has good ventilation.

Engine

To prevent engine damage when the ma- chine is in storage for 30 days or more, fol- low the steps below:

SLet the engine run until it is out of petrol.

SDrain the oil from the warm engine. Fill the engine crankcase with new oil.

SRemove the spark plug from the cylinder. Pour one ounce of oil into the cylinder. Slowly pull the recoil starter handle so that the oil will protect the cylinder. Install a new spark plug in the cylinder.

SClean dirt and debris from the cylinder cooling fins and the engine housing.

F-050202L

19

Image 19
Contents Power Trim Table of Contents Hayter Limited Limited WarrantyGeneral Operation Safety RulesSafety Precautions Responsibility Of The OwnerChildren ServiceSlope Operation Never run an engine indoors or inside a closed area Control And Operating Pictorials Safety Warning PictorialsAssembly Contents of Parts BAG AssemblyTo Remove the Trimmer from Carton HOW to Attach the Guard HOW to Raise the HandleFill Crankcase With Oil Engine PreparationFill Fuel Tank With Petrol Operation Know Your PowertrimHOW to Stop Trimmer Head HOW to Stop the EngineHOW to USE Throttle Control HOW to USE Trimmer Head Drive LeverHOW to USE Primer Button Trimmer Tips HOW to Start the EngineProduct Specifications MaintenanceCustomer Responsibilities Jackshaft Assembly How To LubricateHow To Change Engine Oil Spark Plug HOW to Adjust the Height of the HandlebarHOW to Change Trimmer Lines Service and Adjustment HOW to Replace the Trimmer LineHOW to Replace the Drive Belt Trimmer StorageEngine Trouble Cause Correction Trouble Shooting ChartEngine will not stop Code 407C Key Description Code 407C Code 407C 050202L 050202L How To Order Replacement Parts