Assembling the Mower Before First USE

Delivery Checklist

Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing, contact your local Hayter dealer.

1.	Motor Handbook.	5. Warranty Reg Card.
2.	Grassbag Frame.	6.	Supply Cable.
3.	Grassbag Top Cover.	7.	Parts list/D of C.
4.	Grassbag Fabric.

To prevent accidents cut off the long ribbon attached to the grassbag and discard. (Refer fig.1)

Handlebar

Unscrew the handlebar securing knobs sufficiently to allow the handlebar to pivot.

Unfold the handlebar to the operating position. Tighten all handlebar knobs to secure in position.

(Refer fig.2)

Take care to ensure that the power cable does not become snagged at the pivot points.

Grassbag Attachment

Once the grassbag is assembled. Raise the rear deflec- tor, pass the grassbag under the handlebar and hook into position. Lower the rear deflector to rest on the grassbag.

(Refer fig.3)

Supply Cable

Route the supply cable loosely across to the cable cleat on the left side of the handlebar. Make a loop in the supply cable and secure to the cable cleat. (Refer fig.4)

Fig. 1	Fig. 2	Fig. 3	Fig. 4