Hunter Fan 42027-01 manual Uninstalling the Light Fixture, Attaching e Pull Chain Pendent

7 • Completing Your Installation With or Without a Light Fixture (Continued)

Uninstalling the Light Fixture

1.Disconnect the plug connectors.

2.Uninstall the nut and washer from the end of the light fixture inside the lower switch housing.

3.Remove the light fixture from the lower switch housing pulling disconnected wires through the hole in the center of the lower switch housing.

4.Locate the no-light assembly. Place the pipe from the assembly into the lower switch housing. Install the nut and washer (removed in step 3) onto the pipe to secure the no-light assembly to the switch housing.

5.Install the lower switch housing to the upper switch housing with three screws.

Attaching e Pull Chain Pendent

14Insert the end of the fan pull chain between the hooks on the pull chain pendant. Pull tight to capture the link between the hooks.

Lower	Nut and
	Washer
Switch
Housing

Light Fixture	Step 2
Step 4
Nut and
Washer
Lower
Switch
Housing
No-light
Assembly

Step 5

Hunter Fan Company 42027-01 • 12/09/05