5 • Installing the Canopy and Canopy Trim Ring
5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket.
5-2. Raise the canopy over the hanger bracket (For low profile installations, you will need to remove the canopy from the hook first). Align partially installed screws with key slots in canopy.
5-3. Twist canopy clockwise to secure.
5-4. Install third canopy screw in round hole on canopy. Securely tighten all three screws.
5-5. Using both hands, push the canopy trim ring up to the top of the canopy. e canopy trim ring will snap and lock into place.
Steps 5-1 – 5-2 | Hanger Bracket |
Should you need to remove the canopy trim ring, follow these steps:
1.Locate the tab indicators, small bumps on top of tabs.
2.Press firmly on opposite sides of the ring towards the canopy. e tabs will flex out releasing the trim ring from the canopy
Step 5-3
Steps 5-4 – 5-5
42027-01 • 12/09/05 | Hunter Fan Company |
