Hunter Fan 42027-01 manual Wiring the Fan

Page 8

4 • Wiring the Fan

Step 4-3

Step 4-4

8

Wire Nut

All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes.

4-1. Disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location.

4-2. Decide how you want to set up the fan and light controls. You can control the fan and/or lights together or separately using one or two wall switches. Follow Step 4-3 OR Step 4-4, depending on what you decide.

4-3. If you want to, you can control the fan and light separately using two wall switches, connect the wires as follows:

e bare or green ground wire from the ceiling to the green ground wire from the hanger bracket and the green ground wire from the fan

e white wire from the ceiling to the white wire from the fan

e black wire from the ceiling to the black wire from the fan

e black/white wire from the fan to the wire for the wall switch

4-4. Alternatively, you can control both fan and light with one switch. To do so connect the wires as follows:

e bare or green ground wire from the ceiling to the green ground wire from the hanger bracket and the green ground wire from the fan

e white wire from the ceiling to the white wire from the fan

e black wire from the ceiling to the black and the black/white

wire from the fan

4-5. To connect the wires, hold the bare metal leads together and place a wire nut over them, then twist clockwise until tight.

CAUTION: Be sure no bare wire or wire strands are visible after making connections.

4-6. Push all wires and wire nuts back into the hanger bracket.

Hunter Fan Company

42027-01 • 12/09/05

Image 8
Contents 42027-01 12/09/05 For Your Records and Warranty Assistance WelcomeInstaller’s Choice and Optional Accessories Understanding Mounting and Installer’s ChoiceInstalling Multiple Fans? Getting ReadyInstalling the Hanger Bracket Do not remove the protective wrap Go to 4 Wiring the FanAssembling and Hanging the Fan Assembling and Hanging the Fan Low Profile Only Wiring the Fan Installing the Canopy and Canopy Trim Ring Assembling the Blades Insert them by hand into the holes on the bladesCompleting Your Installation With or Without a Light Fixture Completing Your Installation With or Without a Light Fixture Installing the Glass Bowl Attaching e Pull Chain PendentsUninstalling the Light Fixture Attaching e Pull Chain PendentOperating and Cleaning Your Ceiling Fan To Change Airflow DirectionTroubleshooting Problem Nothing happens fan does not moveProblem Noisy operation Problem Excessive wobbling