Fan Blade Assembly
! CAUTION !
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE BRACKETS WHEN INSTALLING THE BRACKETS, BALANCING THE BLADES, OR CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN BETWEEN ROTATING FAN BLADES.
Installation Of Fan Blade Assembly
1.Loosen the blade assembly screw, but do not remove.
2.Align the blade blase assembly screw with the Adapt Air blade shaft counter sink (see Fig. 14).
3.Slide the blade assembly onto the Adapt Air blade shaft. (see Fig. 15).
4.Before tightening the blade assembly screw, slightly turn blade assembly while hand tightening the set screw.
5.Tighten the blade assemble screw with pliers or adjustable wrench.
12
Blade
Counter Sink
Blade Assembly
Adapt AirScrew
Blade Shaft
Fig. 14 | Fig. 15 |
Hunter Fan Company |