Husqvarna 14 Pro manual Checking and adjustment of the throttle wire, Checking the tyre pressure

Page 39

MAINTENANCE

Checking and adjustment of the throttle wire

Check that the engine responds to the throttle control and that the correct engine speed is achieved at full throttle.

If in doubt, contact the service workshop

If necessary the following adjustment can be made:

1.Release the clamping screw and push the throttle control to full throttle position.

2.Pull the throttle wire’s outer casing to the right and tighten the clamping screw.

Checking the tyre pressure

The tyre pressure should be 60 kPa (0.6 kp/cm2) all round.

To improve driving the pressure on the rear tyres can be reduced to 40 kPa (0.4 kp/cm2).

The maximum tyre pressure is 80 kPa (0,8 kp/cm2).

IMPORTANT INFORMATION

Different tyre pressures on the front tyres will result in the blades cutting the grass at different heights.

English – 37

Image 39
Contents 101 90 Rider 14 ProSvenska Contents II. Slope operation Safety InstructionsSafe operation practices for ride-on mowers General operationIntended use IV. ServiceTravel and transport on public roads TowingRead the instructions Explanation of SymbolsGeneral use Do as follows Driving on slopesChildren MaintenanceNever smoke in the vicinity of the battery or Presentation Presentation10 1112 13 Location of the controls Throttle control Choke leverSpeed limiter Lift lever for cutting unit Cutting unitFuelling Lever for adjustment of the cutting heightParking brake SeatDriving Before startingStarting the engine Driving the machine Cutting tips Disengage lever Stopping the engineMaintenance schedule MaintenanceRight-hand fender Removing of the machine hoodsEngine hood Front hoodCheck the engine’s oil level Check the engine’s cooling air intakeChecking of the fuel pump’s air filter Check the transmission’s oil level Check the transmission’s air intakeChecking and adjustment of the steering wires Poorly adjusted brakes can result in reduced braking power Adjusting the brakesCheck the level of the battery acid Check the safety systemReplacing the air filter Do not use compressed air to clean the paper filterFitting the cutting unit Installing BioClip Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitRemoving the cutting unit Removing the belt Replacing the cutting unit’s belts Belt replacement on the BioClipBelt replacement on BioClip Placing in service position Service position for cutting unitMaintenance Restoring from service position Checking the blades Changing the oil Lubrication of front wheel bearings Replacement of the oil filterLubrication General lubricationChecking the tyre pressure Checking and adjustment of the throttle wireReplacement of the fuel filter Cleaning the filterMuffler air intake Problem Procedure Trouble Shooting ScheduleService StorageWinter storage Wiring Diagram Rider 14 Pro Technical DataSide ejector Rear ejector BioClip«*3%5¬ Page 2000W02

14 Pro specifications

The Husqvarna 14 Pro is a reliable and powerful cutting instrument utilized primarily in professional applications. Designed with the heavy-duty user in mind, this saw exemplifies efficiency and durability, making it an essential tool for construction and woodworking professionals.

One of the main features of the Husqvarna 14 Pro is its robust engine, which boasted a high power-to-weight ratio. With its advanced two-stroke engine technology, it provides excellent performance while maintaining lower fuel consumption and emissions. The efficient engine is designed for optimal power delivery, ensuring that the user can tackle the toughest cutting tasks with confidence.

The 14 Pro features a 14-inch cutting blade, allowing users to make precise cuts through a variety of materials, including concrete, asphalt, and masonry. The blade's design contributes to both improved performance and longevity, making it a cost-effective choice for professionals who rely on dependable tools to complete their projects on time.

One of the standout technologies integrated into the Husqvarna 14 Pro is the Active Air Filtration system. This innovative feature ensures that the engine is well-protected from contaminants, extending the lifespan of the saw and maintaining peak performance. Alongside this system is the Wet Cutting Kit option, which allows for wet cutting applications to minimize dust and improve cut quality.

Ergonomics play a significant role in the design of the Husqvarna 14 Pro. The saw comes equipped with adjustable handles, ensuring that professionals can work comfortably for extended periods. The lightweight design also contributes to reduced user fatigue, allowing for more efficient operation throughout the day.

Safety is another vital aspect of the Husqvarna 14 Pro. The saw is equipped with several safety features, including a protective guard and an emergency stop button. These features provide peace of mind to users, assuring them that they can operate the tool with minimized risk.

In summary, the Husqvarna 14 Pro stands out in the category of cutting saws due to its powerful engine, advanced filtration technology, precision cutting capabilities, ergonomic design, and robust safety features. Ideal for professionals in construction and masonry, the Husqvarna 14 Pro is designed not just to meet but to exceed the expectations of demanding users, marking it as a trusted ally in heavy-duty applications.