Husqvarna 327P5X-series, 327P4 manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator’s manual.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•A protective helmet where there is a risk of falling objects

• Approved hearing protection

• Protective goggles or a visor

This product is in accordance with applicable EC directives.

This machine is not electrically insulated. If the machine

touches or comes close to high- voltage power lines it could lead

to death or serious bodily injury. Electricity can jump from one point to another by arcing. The

higher the voltage, the greater the distance electricity can jump. Electricity can also travel through branches and other

objects, especially if they are

wet. Always keep a distance of at least 10 m between the machine and high-voltage power lines and/or any objects that are touching them. If have to work within this safe distance you should always contact the relevant power company to make sure the power is switched off before you start work.

This machine has a long reach. Make sure that no people or animals come closer than 15 m when the machine is running.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Other symbols/decals on the

machine refer to special certification requirements for certain markets.

2 – English

The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch

automatically returns to the start position. In order to prevent unintentional starting, the spark plug

cap must be removed from the spark plug when assembling, checking and/or performing maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

Filling with chain oil and adjusting oil flow

Page 1 Page 3
Image 2
Page 1 Page 3
Contents 327P4 327P5X-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutMuffler Stop switchVibration damping system Only use cutting equipment recommended by us Quick release Balance Flex harnessCutting equipment Chain Sharpening your chain and adjusting raker clearanceSpecification of bar and saw chain General Safety Precautions Tensioning the chain Filling with chain oil Adjusting chain lubricationLubricating cutting equipment Checking chain lubricationChain drive sprocket Checking wear on cutting equipment ChainWhat to do if lubrication does not work May increase the risk of accidentsFitting the cutting head AssemblyAdjusting the harness Fitting the bar and chainAssembling and dismantling the two-piece shaft AssemblyFilling with oil Fitting the impact guardAssembly of the saw attachment Fuel Fuel safetyFuel Handling Fuelling MixingStarting and stopping Starting and StoppingCheck before starting StartingStopping Working Techniques Safety instructions regarding the surroundingsSafety instructions while working General working instructionsSafety instructions after completing work Basic working techniquesWithout having the cutting attachment in full view Maintenance CarburettorLow speed jet L Fine adjustment of the idle speed TCorrectly adjusted carburettor High speed jet HSpark plug MufflerCooling system Is damaged it should be replacedAir filter Cleaning the air filterTwo-piece shaft Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataBar and chain combinations Approved accessories Art No Use withEC-declaration of conformity Applies to Europe only Page Page Page Page 1150991-26

327P5X-series, 327P4 specifications

The Husqvarna 327P4 and 327P5X series are advanced professional pole saws designed for efficiency and ease of use in demanding applications. With their innovative features and robust construction, these models stand out in the market, catering to a wide range of tree care and landscaping needs.

One of the defining characteristics of the Husqvarna 327P4 and 327P5X series is their powerful engines. Equipped with a high-performance X-Torq engine, these pole saws deliver increased power output while significantly reducing fuel consumption and emissions. This technology not only enhances performance but also aligns with environmental standards, making these tools a sustainable choice for professionals in the field.

The ergonomic design of the pole saws ensures that users can operate them comfortably during extended periods. The lightweight construction, combined with an optimal weight balance, minimizes user fatigue. Additionally, the adjustable harness offers greater control, allowing operators to manage the saw with precision and ease, even at greater heights.

Both models feature Husqvarna's unique Smart Start system, which allows for hassle-free starting with minimal effort. This is particularly advantageous when working in remote locations or during adverse conditions. The air purge function also assists in quick starts by removing air from the fuel system and carburetor.

The 327P5X model takes it a step further with its telescopic pole, which can be extended for reaching higher branches without the need for ladders. This feature adds versatility and accessibility to challenging trimming tasks, making it a favorite among tree care specialists and landscapers alike.

Additionally, both the 327P4 and 327P5X series are equipped with a high-quality cutting system that ensures clean and efficient cuts. They come with a durable, sharp chain that minimizes wear and maintains cutting performance over time. The quick-release mechanism allows for easy maintenance and chain adjustments, ensuring the saw remains in optimal condition.

In summary, the Husqvarna 327P4 and 327P5X series are exceptional pole saws that blend power, efficiency, and user-friendly design. With technologies like the X-Torq engine, Smart Start, and a telescopic pole option, these models cater to the needs of professionals seeking reliable and effective tools for tree care and landscaping projects. Whether for routine maintenance or challenging trimming tasks, these pole saws are built to perform reliably, providing users with the confidence to tackle any job.
Top Page Image Contents